Bedienungsanleitung Yamaha MX49 (Seite 24 von 48) (Englisch)

571261

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

MX49/MX61 Owner’s Manual

Quick Guide

Keyboard Octave/

Transpose settings

Octave

The OCTAVE [-]/[+] button lets you shift the pitch of the

keyboard in octaves, up to a maximum of three. For

example, you may want to shift the pitch down lower to

get extra bass notes, or shift up to get higher notes for

leads and solos. Pressing the [-] and the [+] buttons

together at the same time will return the setting to the

initial value (0).

The current octave range can be confirmed via the status

of the lamp of the OCTAVE [-]/[+] buttons. When set to

one octave down or up, the corresponding lamp lights.

When set to two octaves down or up, the corresponding

lamp flashes slowly. When set to three octaves down or

up, the corresponding lamp flashes quickly.

Transpose

The TRANSPOSE [-]/[+] button lets you shift the pitch of

the keyboard in semitones (up to 11 semitones). This

function allows you to play in the same position and with

the same fingering, even if the Song data or another

instrument player is playing in a different key. Pressing

the [-] and the [+] buttons together at the same time will

return the setting to the initial value (0). When set to one

semitone down or up, the corresponding lamp lights.

Storing the edited settings

When you are satisfied with the results, store the settings

you’ve made to internal memory (as a Performance) so

that they can be recalled after turning off the power.

Press [STORE], then press [ENTER]. Finally, press [INC/

YES] to store the settings to Performance 1.

NOTE For detailed instructions on the Store operation, see “Storing

the Performance” (page 33).

Playing the Performances

A program in which multiple Voices (parts) are combined

is referred to as a “Performance,” and the instrument has

a total of 128 Performances. A Performance consists of

up to 16 Parts. The Parts which you normally use for

playing the keyboard are Parts 1 and 2.

When turning on this instrument with the factory settings,

Performance 1 is called up. In the instructions covered so

far (pages 18 – 24), you’ve played and edited Parts 1 and

2 of Performance 1, which is simply designed for playing

one or two Voices. Performances 2 – 128 are provided for

enjoying a powerful and thick sound which consists of

multiple various Voices. In the instructions below, we’ll

change the Performance to one of Performances 2 – 128

and play it.

1 Press [SELECT].

The Performance Select display is called up.

2 Rotate the [DATA] dial to select a

Performance.

The selected Performance number is shown in the

[PERFORMANCE NUMBER] display.

NOTE For a detailed list of all Performances, see the

“Performance List” of the “Data List” PDF document.

Performance 128

Performance 1

Normally used Parts

Part 1

Voice

Part 2

Part 3

Voice

Part 10

Voice

Part 16

Voice

Performance*Select

001(A01):MXCategory

Performance Select display

Performance

number

Performance

group

Performance name

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX49 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info