Bedienungsanleitung Yamaha MX49 (Seite 30 von 48) (Englisch)

571261

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

MX49/MX61 Owner’s Manual

Quick Guide

3 Press the Cursor [u] button if necessary to

select “01:Chorus Eff,” then press [ENTER].

The Chorus effect setting display is called up.

4 Press the Cursor [u] buttons repeatedly if

necessary to call up the 1st page, then use

the Cursor [l]/[r] buttons and the [DATA]

dial to change the Chorus effect category/

type.

5 Press the Cursor [d] button to call up the 2nd

page, then rotate the [DATA] dial to select a

preset for the effect parameters of the

selected effect type.

Each preset type contains optimum settings for

various parameters, letting you select a general “feel”

you want and have the parameters set accordingly.

NOTE You can also edit each effect parameter in the 3rd or

later pages. For details about each parameter, see the

“Synthesizer Parameter Manual” PDF document.

6 When you have finished making Chorus

effect settings, press [EXIT], then press the

Cursor [d] button to select “02:Reverb Eff.”

Finally, press [ENTER].

The Reverb effect display is called up.

7 Press the Cursor [u] button to call up the 1st

page, then rotate the [DATA] dial to change

the Reverb effect type

8 Press the Cursor [d] button to call up the 2nd

page, then rotate the [DATA] dial to select a

preset for the effect parameters of the

selected effect type.

NOTE You can also edit each effect parameter in the 3rd or

later pages. For details about each parameter, see the

“Synthesizer Parameter Manual” PDF document.

9 When you have finished making Reverb effect

settings, press [EXIT] two times, then press

the Cursor [d] button to select “02:Part.”

Finally, press [ENTER].

The Performance Part Edit display is called up.

10 Press the Cursor [u] button repeatedly if

necessary to select “01:Play Mode,” then

press [ENTER].

11 Press the desired Category button to select

the edited Part.

The selected Part number is shown in the upper left

corner of the display.

12 Use the Cursor [u]/[d] buttons to select

“ChoSend” and “RevSend” in 5th and 6th

pages, then rotate the [DATA] dial to adjust

the parameter settings.

These parameters set the depth of Chorus/Reverb

effects applied to the selected Part sound.

Common

01:Chorus*Eff

Common*Chorus*Eff

***CHO:****G*Chorus

Effect category Effect type

Common*Chorus*Eff

Preset=*******Basic

Common

02:Reverb*Eff

Common*Reverb*Eff

****Type=Rev

]

X*Hall

HINT

Performance Edit indicator

When editing Performance

parameters, a dot (.) is shown in the

lower right of the [PERFORMANCE

NUMBER] display. This provides a

quick confirmation that the current Performance has

been modified but not yet stored. When you want to

store the current status, execute the Performance

store function (page 33). After storing, this indication

will be gone.

Common*Reverb*Eff

Preset=*******Basic

EDIT

02:Part

Part01

01:Play*Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX49 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info