Bedienungsanleitung Yamaha MX49 (Seite 39 von 48) (Englisch)

571261

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

MX49/MX61 Owner’s Manual

Shift Function List

Some of the important functions and operations on the instrument can be executed with convenient panel control

shortcuts. Simply hold down the [SHIFT] button and press the indicated button (as described below).

Display Messages

Appendix

Operation Function

[SHIFT] + [INC]/[DEC]/[DATA] dial Increases/decreases the value by 10. (Program number in the Play mode; parameter

value in the Edit mode)

In the Performance Select display, this switches among the Performance groups.

[SHIFT] + [SPLIT] In the Performance top display, this replaces Part 1 with Part 2 (Invert function).

[SHIFT] + [LAYER] In the Performance top display, this copies a selected Part (Part 1 or Part 2) to the

other Part (Unison function).

[SHIFT] + [EXIT] Calls up the Performance top display.

[SHIFT] + [SELECT] Resets Performance 1 to the factory settings, and calls up the top display of

Performance 1 (Quick Reset function).

[SHIFT] + [KNOB FUNCTION] Instantly resets Knobs [A] – [D] to Function 1.

[SHIFT] + [PART 1-2 LINK] Resets [PART 1-2 LINK] to on.

[SHIFT] + [ARP] Calls up the Arpeggio display of Performance Part Edit.

[SHIFT] + desired Category button In the Performance top display, this instantly calls up the Voice in the next Sub

Category of the selected Category. Perform this operation with the same Category

button repeatedly to select the subsequent Sub Categories.

In the Performance Select display, this selects the corresponding Performance

among Performances 1 – 16 in the selected Performance group.

NOTE For details about Sub Categories, see the “DATA LIST” PDF document

LCD indication Description

All remote templates stored. Appears when you store the Control Template in the Remote mode.

Are you sure? Confirms whether you want to execute a specified operation or not.

Auto power off disabled. Appears when Auto Power Off is disabled (by simultaneously holding down the lowest key on the

keyboard and turning the power on).

Bulk protected. Bulk data cannot be received because of the Utility setting.

Clear edit Voice? Appears when executing Performance Store while modifying but not yet having stored a Voice.

Make sure to confirm whether the edited Voice data should be erased or not.

Completed. The specified load, save, format, or other Job has been completed.

Connecting USB device . . . Currently recognizing the USB flash memory connected to the USB [TO DEVICE] terminal.

Device number is off. Bulk data cannot be transmitted/received since the device number is off.

Device number mismatch. Bulk data cannot be transmitted/received since the device numbers don’t match.

Executing . . . A Format operation or Job is being executed. Please wait.

FactorySet . . . The Factory Set operation is automatically being executed when you turn the power on.

File already exists. A file having the same name as the one you are about to save already exists.

File not found. The file of the specified type cannot be found.

Illegal file name. The specified file name is invalid. Try entering a different name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX49 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info