Bedienungsanleitung Yamaha MX49 (Seite 42 von 48) (Englisch)

571261

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

MX49/MX61 Owner’s Manual

Appendix

Distorted sound.

 Are the effect settings appropriate?

Use of certain effects at certain settings may produce distortion.

 Are the filter settings appropriate?

Excessively high filter resonance settings can cause distortion.

 Are any of the following volume parameters set so high that clipping is occurring?

Sound is cut off.

 Is the entire amount of notes played (via your keyboard playback and Song/Pattern/Arpeggio playback) exceeding the maximum

polyphony of this instrument?

The maximum number of simultaneous notes may be less than 128 depending on the Voices used.

Only one note sounds at a time.

 When this situation occurs, the Mono/Poly parameter in the current mode is set to “mono.” If you wish to play chords, set this parameter

to “poly.”

Pitch or intervals are wrong.

 Is the Master Tune parameter in the Utility display set to a value other than “0”?

 Is the Note Shift parameter in the Utility display set to a value other than “0”?

 Are the Note Shift and Detune parameters of each Part set to values other than “0”?

No effect is applied.

 Check the on/off status of the Insertion Effect switch.

 Is the Reverb Send or Chorus Send set to a value other than “0”?

 Has the Insertion Effect type for the Part been set to “thru”?

The Edit Indicator appears, even when parameters are not being edited.

 Keep in mind that even though the Edit mode is not active, simply moving a Knob or playing back the MIDI data of the USB flash

memory may cause the Edit Indicator to appear.

[EDIT]  Select “02:Part”  [ENTER]  Select “05:Voice Insert Eff”/“05:DrumKit Insert Eff”  [ENTER]

[EDIT]  Select “02:Part”  [ENTER]  Select “02:Filter/EG”  [ENTER]

[UTILITY]  [EDIT]  Select “01:Common”  [ENTER]  Select “05:General”  [ENTER]  “Volume”

[PART SELECT]  “Volume”

[UTILITY]  Select “01:General”  [ENTER]  “WAV Volume”

[EDIT]  Select “02:Part”  [ENTER]  Select “01:PlayMode”  [ENTER]  “Mono/Poly”

[UTILITY]  Select “01:General”  [ENTER]  “Tune”

[UTILITY]  Select “01:General”  [ENTER]  “NoteShift”

[EDIT]  Select “01:Part”  [ENTER]  Select “01:PlayMode”  [ENTER]  “NoteShift”/“Detune”

[EDIT]  Select “02:Part”  [ENTER]  Select “01:PlayMode”  [ENTER]  “InsSw”

[PART SELECT]  “InsSw”

[EDIT]  Select “02:Part”  [ENTER]  Select “01:PlayMode”  [ENTER]  “ChoSend”/“RevSend”

[EDIT]  Select “02:Part”  [ENTER]  Select “05:Voice Insert Eff”/“05:DrumKit Insert Eff”  [ENTER]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX49 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info