Bedienungsanleitung Yamaha MX49 (Seite 20 von 71) (Englisch)

571261

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

MX49/MX61 Reference Manual

Basic Structure

Using a Connected

Computer

Using iOS

Applications

Basic Structure

Controller Block

Tone Generator Block

Effect Block

Arpeggio Block

Song/Pattern

Playing Block

Internal Memory

MIDI/Audio Signal Flow

Connecting to a computer

Creating a Song with a

computer

Reference

Performance

Song/Pattern

File

Utility

Remote

5 Install the MX49/MX61 Remote Tools (downloaded in step 1) to the computer.

Remote Tools consists of two components: the MX49/MX61 Remote Editor and MX49/MX61 Extension, which

enables you to use the MX49/MX61 along with Cubase series. For instructions on installing, refer to the online

Installation Guide included in the downloaded file package.

6 Install the MX Voice List (downloaded in step 1) to the computer.

For instructions on installing, refer to the online Installation Guide included in the downloaded file package.

Precautions when using the USB [TO HOST] terminal

When connecting the computer to the USB [TO HOST] terminal, make sure to observe the following points. Failing

to do so risks freezing the computer and corrupting or losing the data. If the computer or the instrument freezes,

restart the application software or the computer OS, or turn the power to the instrument off then on again.

NOTICE

• Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.

• Before connecting the computer to the USB [TO HOST] terminal, exit from any power-saving mode of the

computer (such as suspend, sleep or standby).

• Before turning on the power to the instrument, connect the computer to the USB [TO HOST] terminal.

• Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB cable

to/from the USB [TO HOST] terminal.

• Quit any open application software on the computer.

• Make sure that data is not being transmitted from the instrument. (Data is transmitted by playing notes on the

keyboard, playing back a song, or etc.)

• While the computer is connected to the instrument, you should wait for six seconds or more between these

operations: (1) when turning the power of the instrument off then on again, or (2) when alternately connecting/

disconnecting the USB cable.

MIDI channels and MIDI ports

MIDI data is assigned to one of sixteen channels, and this synthesizer is capable of simultaneously playing up to

sixteen separate Parts, via the maximum sixteen MIDI channels. However, this sixteen-channel limit can be

overcome by using separate MIDI “ports”—each supporting sixteen channels—and adding another synthesizer

or tone generator for even more instrument sounds. While a single MIDI cable is equipped to handle data over

up to sixteen channels simultaneously, a USB connection is capable of handling far more—thanks to the use of

MIDI ports. Each MIDI port can handle sixteen channels, and the USB connection allows up to eight ports,

letting you use up to 128 channels (8 ports x 16 channels) on your computer. When connecting this instrument to

a computer using a USB cable, the MIDI ports are defined as follows:

Port 1

The tone generator block in this instrument can recognize and use only this port. When playing

the MX49/MX61 as a tone generator from the external MIDI instrument or computer, you should

set MIDI Port to 1 on the connected MIDI device or computer.

Port 2

This port is used to control DAW software on the computer from the MX49/MX61 by using the

Remote Control feature.

Port 3

This port is used as the MIDI Thru Port. The MIDI data received over Port 3 via the USB [TO

HOST] terminal is re-transmitted to an external MIDI device via the MIDI [OUT] terminal. Also, the

MIDI data received over Port 3 via the MIDI [IN] terminal is re-transmitted to an external device

(computer, etc.) via the USB [TO HOST] terminal.

Port 4

This port is not used for the MX49/MX61.

Port 5

This port is used only for data communication of the MX49/MX61 Remote Editor. No other

software or device can use this port.

When using a USB connection, make sure to match the MIDI transmit port and the MIDI receive port as well as

the MIDI transmit channel and the MIDI receive channel. Make sure to set the MIDI port of the external device

connected to this instrument according to the above information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX49 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info