Bedienungsanleitung Yamaha MX49 (Seite 8 von 15) (Englisch)

571261

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

MX49/MX61 Remote Editor Windows: Edit window

MX49/MX61 Remote Editor Owner’s Manual

/ mark

Shows the Editing status of the Control Template or Bank. The mark indicates that the current Control

Template has been modified but not yet stored. This indicator disappears if you click the [Store]

button and then execute the Template Store operation. The mark is also used to indicate that the

current Bank has been modified but not yet saved as a File. This indicator disappears if you use the

[Save]/[Save As] menu in the [File] menu to execute the File Save operation.

Control Template Selection box

Shows the currently selected Control Template. You can select the previous/next template by clicking the

up/down scroll buttons at the right of this box, or select any template in the Current Bank by clicking the

triangular button.

Instrument Select box

Shows the VSTi name which is controlled by the Knobs. You can change the VSTi by clicking the

triangular button then selecting the desired one. You can also input the VSTi name directly in this box

manually. Make sure to input the VSTi name correctly.

n If the desired VSTi is not shown even when you click the triangular button, refer to the Troubleshooting section on

page 14.

Edit section

The Knobs illustrated here correspond to the Knobs on the top panel of the MX49/MX61. Here, you can

assign the desired function to each of the Knobs.

-1 Remote/CC buttons

When Remote is selected, using the Knobs generates the Remote Control messages exclusive for

Cubase. When CC is selected, using the Knobs generates MIDI Control Change messages.

-2 Function Assignment boxes

The Knobs illustrated here are equivalent to the Knobs on the MX49/MX61. Each of the boxes at the right

side of the Knob shows the function assigned to the corresponding Knob. (The function shown here

differs depending on the Remote/CC button status.) You can change the function assigned to each of the

Knobs by clicking a desired box, then selecting the desired function in the Controller Setting section.

In the ONLINE status, setting this parameter changes the settings of the MX49/MX61 in real time.

Controller Setting section

Determines the function of the Knobs corresponding to the column selected in the Edit section. There

are two sections here: Remote section and CC (Control Change) section.

-1 Remote section

Assigns the function to the Function Assignment box selected in the Edit section. The setting here is

available when the Remote/CC button is set to “Remote.” Clicking “Remote” at the left of this section also

sets the Remote/CC button of the Edit section to “Remote.”

• Control Parameter

Click the triangular button to call up the menu, then select the desired function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX49 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX49

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info