Bedienungsanleitung Yamaha MX61 (Seite 35 von 48) (Englisch)

571260

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

MX49/MX61 Owner’s Manual

Quick Guide

Making Global System

Settings (Utility settings)

Pressing [UTILITY] calls up the Utility display, from which

you can make global system settings.

Changing the Master Tune setting

This function sets the overall tuning of the instrument.

1 Press the Cursor [u] button repeatedly if

necessary to select “01:General,” then press

[ENTER].

2 Use the Cursor [u]/[d] buttons to select the

“Tune” parameter, then rotate the [DATA] dial

to change the value.

The pitch is changed in cent increments.

NOTE The frequency of the basic pitch (note A3) is 440 Hz. An

increase of 3 or 4 cents corresponds to a frequency

increase of about 1 Hz.

3 Press [STORE].

All Utility settings are stored.

Adjusting the brightness of the

display (LCD Contrast)

1 Press the Cursor [u] button repeatedly if

necessary to select “01:General,” then press

[ENTER].

2 Use the Cursor [u]/[d] buttons to select the

“LCD Contrast” parameter, then rotate the

[DATA] dial to change the value.

3 Press [STORE].

All Utility settings are stored.

NOTE Adjusting the display brightness

To adjust the brightness of the display, simultaneously

hold down [UTILITY] and press [INC/YES]/[DEC/NO].

Saving/loading files on

USB flash memory (File

settings)

You can save the created Performances and Voices to

USB flash memory, and load data from the USB flash

memory.

Formatting the USB flash memory

Some USB flash memories may not be supported by this

instrument. In this case, follow the instructions below to

format the memory before using it.

NOTICE

If data is already saved to the USB flash memory, be careful

not to format it. If you format the device, all previously

recorded data will be deleted. Make sure to check

beforehand whether or not the device contains important

data.

1 Connect the USB flash memory to the USB

[TO DEVICE] terminal.

2 Press [FILE] to call up the File display.

3 Use the Cursor [u]/[d] buttons to select “05:

Format,” then press [ENTER].

A confirmation message appears. If you wish to

cancel the Format operation, press [EXIT].

4 Press [INC/YES] to execute the Format

operation.

After formatting has been completed, a “Completed”

message appears and operation returns to the

original display.

NOTICE

While formatting is in process, do not remove or

disconnect the USB flash memory from the instrument.

Also, make sure to keep the power of the instrument on

until the operation is finished.

NOTE By executing the Format operation in the File mode, the

USB flash memory will be formatted to MS-DOS or

Windows format. The formatted device may not be

compatible with other devices, such as a Mac computer

or digital camera.

UTILITY*General

Tune=+**0.0/440.0Hz

UTILITY*General

*****LCD*Contrast=5

For details about the Utility settings, see the

“Reference Manual” PDF document.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX61 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX61

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info