Bedienungsanleitung Yamaha MX61 (Seite 23 von 71) (Englisch)

571260

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

MX49/MX61 Reference Manual

Basic Structure

Using a Connected

Computer

Using iOS

Applications

Basic Structure

Controller Block

Tone Generator Block

Effect Block

Arpeggio Block

Song/Pattern

Playing Block

Internal Memory

MIDI/Audio Signal Flow

Connecting to a computer

Creating a Song with a

computer

Reference

Performance

Song/Pattern

File

Utility

Remote

Setting up the MX49/MX61

1 Use the Quick Setup function to specify the “DAW Rec” connection.

Press [UTILITY]  [JOB]  Select “01:QuickSetup”  [ENTER]  Set “Type” to “DAW Rec”  [ENTER]. The

following parameters are set as shown. Local Control (page 65) is set to off. Use this setting when you want to

record your performance on this instrument (excepting Arpeggio data) to DAW software.

2 Store the settings, then return the Performance top display.

Press [STORE], then press [EXIT] repeatedly to return to the top display after storing the settings.

3 Make sure that the Layer and Split functions are off.

If the lamps of the [LAYER] button and/or [SPLIT] button are lit, press the buttons to turn them off.

Setting up Cubase

1 Start Cubase on your computer.

Important

Cubase cannot recognize the MX49/MX61 if you turn the power of the MX49/MX61 on after starting Cubase. Make

sure to start Cubase after turning on the power of the MX49/MX61.

2 On Cubase, open a new project.

Select the “Empty” project in the “More” area of the Project Assistant window, and then click [Create].

3 Confirm that MIDI Thru is set to “on” on Cubase.

Click “File” menu  “Preference”  “MIDI.” Confirm that “MIDI Thru Active” is checked. Then, click [OK] to close

the Preference window. When MIDI Thru is set to on, the MIDI data generated by playing the keyboard and

received by the computer is returned back to the MX49/MX61. As shown in the illustration below, this allows you to

play selected tracks on Cubase (each with a different MIDI channel) and have the respective Parts on the MX49/

MX61 sound. For example, if Tracks 1, 2 and 3 are set to MIDI channels 1, 2 and 3, respectively, and the MX49/

MX61 is set to play Piano, Bass and Strings on MIDI channels 1, 2 and 3, respectively—you can individually select

a track for playing/recording and have that respective instrument sound on the MX49/MX61. Select Track 1 and

play/record the Piano part; select Track 2 to play/record the Bass, and so on.

DAW Rec

Direct Monitor switch on

LocalCtrl off

MIDI Sync auto

Clock Out off

Arpeggio MIDI output switch off

JOB*QuickSetup

c******Type=*DAW*Rec

USB [TO HOST] terminal

Tone generator block

(recognizing MIDI

Channel 3 data)

Keyboard

(output via MIDI

Channel 1)

Local Control = off

MX49/MX61

OUT

CH3

CH1

Computer

(Cubase, etc.)

MIDI Thru = on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX61 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX61

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info