Bedienungsanleitung Yamaha MX88 (Seite 49 von 56) (Englisch)

707407

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

MX49 MX61 MX88 Owner’s Manual

Appendix

Cannot start the Arpeggio.

 Check whether [ARP] is turned on or off.

 Are the Arpeggio switches for both Part and Common set to on?

 Is the MIDI Sync parameter set to “internal” or “auto” (using internal clock)?

Cannot stop the Arpeggio.

 When Arpeggio playback does not stop even if you release the key, set the Arpeggio Hold parameter to “off.”

The Voice produces a different sound depending on the assign destination Part or

Performance.

 Depending on the effect (and other) settings for the Performance or Part, the Voice assigned to the Performance or Part may produce

a different sound. If necessary, change the following parameter settings.

The Song/Pattern cannot be started even when pressing the [R/K] (Play/Pause) button.

 When you attempt to play back the Song data, is the USB flash memory containing the data connected to this instrument?

 Is the [DAW REMOTE] button turned off?

 Is the current display something other than Utility or File?

 Is the MIDI Sync parameter set to “internal” or “auto” (using internal clock)?

Data communication between the computer and this instrument does not work properly.

 Check whether the Port settings on the computer are appropriate or not.

 Check whether the MIDI IN/OUT parameter is set to the appropriate value or not.

MIDI bulk data transmission/reception does not work properly.

 Is the Receive Bulk parameter set to on?

 When receiving MIDI bulk data transmitted via the Bulk Dump function and recorded to the external MIDI device, you need to set the

MIDI Device Number to the same value as when transmitting.

 When transmission does not work properly, is the device number of the MIDI instrument connected to this instrument set to match the

Device Number Parameter in the Utility display?

Cannot save data to the USB flash memory.

 Is the USB flash memory being used write protected? (Write-protect should be set to off for saving data.)

 Is the USB flash memory being used properly formatted?

[EDIT]  Select “02:Part”  [ENTER]  Select “03:Arp Select”  [ENTER]  “Switch”

[EDIT]  Select “01:Common”  [ENTER]  Select “04:Arp Switch”  [ENTER]  “Switch”

[UTILITY]  Select “02:MIDI”  [ENTER]  “MIDI Sync”

[EDIT]  Select “02:Part”  [ENTER]  Select “03:Arp Select”  [ENTER]  “Hold”

[EDIT]  Select “02:Part”  [ENTER]  Select “01:PlayMode”  [ENTER]  “ChoSend”/“RevSend”

[EDIT]  Select “01:Common”  [ENTER]  Select “01:Chorus Eff”/“02:Reverb Eff”  [ENTER]

[PART SELECT]  “InsSw”

[EDIT]  Select “02:Part”  [ENTER]  Select “02:Filter/EG”  [ENTER]

[UTILITY]  Select “02:MIDI”  [ENTER]  “MIDI Sync”

[UTILITY]  Select “02:MIDI”  [ENTER]  “MIDI IN/OUT”

[UTILITY]  Select “02:MIDI”  [ENTER]  “RcvBulk”

[UTILITY]  Select “02:MIDI”  [ENTER]  “DeviceNo.”

[FILE]  Select “05:Format”  [ENTER]  [INC/YES]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MX88 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MX88

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info