Bedienungsanleitung Yamaha N1 (Seite 27 von 47) (Englisch)

590427

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

N1 Owner’s Manual • 27

Listening to songs in USB Flash Memory

You can conveniently connect a USB flash memory device to the instrument and listen to songs recorded to that

device (on a computer). You can also save your recorded performances on the instrument to the connected device

and play those songs back as well. Before using a USB flash memory, be sure to read “Precautions when using the

USB [TO DEVICE] terminal” on page 26.

1 Engage the USB Song mode.

Make sure that the USB flash memory device is connected

to the instrument. Then press the [+] or [-] button while

holding the [DEMO/SONG] button until the message

“

xx” or “

xx” (xx is a number 00–99) appears on the display.

The message “

xx” is displayed when no “

xx” songs exist.

If the USB flash memory device is not connected or there is no USB songs, nei-

ther “

xx” nor “

xx” appears.

2 Select a USB song.

Press the [+] or [-] button to select the song you want to play.

•

U00

–

U99

..... Select the number of the desired USB song, that of the per-

formance which you’ve recorded and saved using this

instrument (page 25) and play the song.

•

F00

–

F99

..... Select the number of the desired USB song, that which

you’ve saved by using a computer and play the song.

•

U.AL

................ Play all USB songs in sequence.

•

U.rd

................ Play all USB songs continuously in random order.

3 Start playback.

Press the [PLAY/STOP] button to start playback.

4 Stop playback.

Press the [PLAY/STOP] button to stop playback.

3, 4

USB song:

In this manual, the performance data saved

to a USB flash memory device is called a

“USB song.”

The display may not appear immediately,

depending on the number of the folders in

the USB flash memory.

U00

Certain songs may take more time than oth-

ers to start playback. Keep in mind that this

also affects the time between playback of

successively played songs.

The playback voice can be changed.

You can play the keyboard along with the

USB song. The voice of the song played is

assigned to the voice playing on the key-

board.

While a USB song is playing, hold down the

[METRONOME] button and press the [+] or

[-] button to change the song tempo.

If you are using the metronome (page 17)

during USB song playback, press the [+] or

[-] button to change the song tempo. You

can also press keys to change the tempo.

Default setting: International

Character Code

If the song cannot be loaded, you may need to change the character code setting.

 International

Files with western alphabetical names (including umlaut or diacritic

marks) can be loaded (files with names in Japanese cannot be loaded).

Turn the power on while holding the [FUNCTION] and [REVERB] but-

tons.

 Japanese

Files with western alphabetical names and Japanese names can be loaded;

however, file names including umlauts or diacritic marks cannot be

loaded.

Turn the power on while holding the [FUNCTION] and [METRONOME]

buttons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha N1 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha N1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info