Bedienungsanleitung Yamaha N1 (Seite 36 von 47) (Englisch)

590427

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

36 • N1 Owner’s Manual

Troubleshooting

* The message list (page 35) is also provided for your reference.

Problem Possible Cause and Solution

The instrument does not turn on.

The instrument has not been plugged in properly. Securely insert the female plug into the socket

on the instrument, and the male plug into a proper AC outlet (page 9).

Noise is heard from the speakers

or headphones.

The noise may be due to interference caused by the use of a mobile phone in close proximity to

the instrument. Turn off the mobile phone, or use it further away from the instrument.

A click or pop is heard when the

power is turned on or off.

Electrical current is being applied to the instrument. This is normal.

The overall volume is low, or no

sound is heard.

• The Volume is set too low: set it to an appropriate level using the [MASTER VOLUME] control

(page 10).

• Make sure a pair of headphones is not connected to the headphones jack (page 11).

• Make sure that Local Control (page 34) is on.

The pitch and/or tone of the

Piano Voices in certain ranges do

not sound right.

The Piano Voices attempt to precisely simulate actual piano sounds. However, as a result of sam-

pling algorithms, overtones in some ranges may sound exaggerated, producing a somewhat dif-

ferent pitch or tone. This is normal, and no cause for concern.

Sound is not heard on a particu-

lar key.

Keyboard may not function normally if the key was pressed when the power was turned on. Turn

off the power and turn it again to reset the function. Do not touch any keys when turning the

power on (page 10).

Sound input to the AUX IN jacks

is interrupted.

The output volume of the external device connected to this instrument is too low. Increase the

output volume of the external device. The volume level reproduced via this instrument’s speakers

can be adjusted by using the [MASTER VOLUME] control.

The damper pedal has no effect.

• The pedal cord may not be securely connected to the [PEDAL] jack. Be sure to insert the pedal

cord all the way until the metal part of the cord plug disappears from view (page 38).

• The damper pedal was pressed when the power was turned on. This is not a malfunction; press

the pedal again to reset the function.

The USB flash memory device

has hung up (stopped).

• Disconnect the device and connect it to the instrument again.

• The USB flash memory is not compatible with the instrument. Only use the USB flash memory

device whose compatibility has been confirmed by Yamaha (page 26).

Maintenance

When the surface of the instrument loses luster, wipe the instrument evenly with a cloth moistened with some special piano cleaner.

For more information, contact the store where you purchased the instrument.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha N1 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha N1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info