Bedienungsanleitung Yamaha P-125 (Seite 12 von 36) (Englisch)

712855

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Setting Up

P-125 Owner’s Manual

Introduction

You can produce a natural sustain as you play by

pressing the included footswitch plugged into the

[SUSTAIN] jack.

Also an optional FC3A foot pedal or FC4A or FC5

footswitch can be connected to this jack. The FC3A

lets you use the Half Pedal function.

Damper Resonance

When you select a Piano Voice, pressing the foot-

switch activates the Damper Resonance/ Sustain

sampling effect (when on) to accurately recreate

the resonance of an acoustic piano’s strings.

To turn the effect on and enable footswitch control,

simultaneously hold down [PIANO] and press the

C#3 key; to turn it off, simultaneously hold down

[PIANO] and press C3.

Default setting: on

The [PEDAL UNIT] jack is for connecting an

optional LP-1B/LP-1WH pedal unit. When connect-

ing the pedal unit, make sure to also assemble the unit

on an optional keyboard stand (L-125B/L-125WH).

Damper (Right) Pedal

Pressing this pedal will sustain notes longer. Releas-

ing this pedal immediately stops (damps) any sus-

tained notes. The damper pedal is compatible with the

Damper Resonance (see column at left). A “half-

pedal” function of this pedal creates partial sustain

effects, depending on how far down you press the

pedal.

Sostenuto (Center) Pedal

If you play a note or chord on the keyboard and press

the sostenuto pedal while the note(s) are held, those

notes will sustain as long as you hold the pedal (as if

the damper pedal had been pressed) but all subse-

quently played notes will not be sustained. This makes

it possible to sustain a chord, for example, while other

notes are played “staccato.”

Soft (Left) Pedal

The soft pedal reduces the volume and slightly

changes the timbre of notes played while the pedal is

pressed. The soft pedal will not affect notes that are

already playing when it is pressed.

Using a Pedal (Sustain)

• Damper Resonance cannot be used in Duo (page 15).

Half-pedal function (for FC3A and Pedal Unit)

This function allows you to vary the sustain length

depending on how far the pedal is pressed. The far-

ther down you press the pedal, the more the sound

sustains. For example, if you press the damper pedal

and all notes you are playing sound a bit murky and

loud with too much sustain, you can release the pedal

half way or higher to decrease the sustain (murki-

ness).

• Do not press the footswich when turning the power on. Doing this changes the

recognized polarity of the footswitch, resulting in reversed footswitch operation.

• Make sure that power is OFF when connecting or disconnecting the footswitch

or pedal.

Using the Optional Pedal Unit

NOTE

• Make sure that power is off when connecting or disconnecting the pedal unit.

• When the “Jazz Organ” is selected, pressing and releasing this pedal switches

between “fast” and “slow” of the Rotary Speaker speed. When the Vibraphone is

selected, this pedal switches Vibrato on and off.

LP-1B/LP-1WH

(Sold separately)

L-125B/L-125W H

(Sold separately)

NOTE

If you press and hold the sostenuto pedal here,

only the notes held at this timing will be sustained.

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-125 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info