Bedienungsanleitung Yamaha P-125 (Seite 22 von 36) (Englisch)

712855

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Recording Your Performance

P-125 Owner’s Manual

Reference

To record the right part ([R]):

To record the left part ([L]):

After a while, the [] lamp will flash at the cur-

rent tempo. When the already recorded data exists,

the [] and [

/] lamps will flash at the current

tempo.

If data has already been recorded to the other

Part:

The data in this Part will be played back while

recording. To turn the Part off or on, hold down

[

/] and press the appropriate Part button.

Start recording.

Play the keyboard or press [/] to start record-

ing. The [] lamp lights up while the [

/] lamp

flashes at the current tempo.

Press either [] or [/] to stop

recording.

The [] and [/] lamps flash, indicating that the

recorded data is being stored. After the operation

is completed, the [] and [

/] lamps will be

turned off.

If desired, record the other part by

repeating Steps 1 – 4.

To hear the recorded Song, Press [/]

to start playback.

Press [/] again to stop playback.

While holding down [], press [DEMO/

SONG].

The [] and [/] lamps flash (in alternation).

To exit from this status, press [].

Press [/] to delete the data of the

entire Song.

After the operation is completed, [] and [/]

lamps turn off.

To delete a specific Part:

While holding down [], press [L] or [R] to

engage the Record Ready mode.

The [] lamp will flash.

Press [/] to start recording without playing the

keyboard.

Press [] or [/] to stop recording.

All data recorded for the selected Part will be

deleted, and the lamp turns off.

The following parameter settings of the Song can be

changed after the Record operation is completed.

For individual parts:

Voice, Balance, Reverb Depth, Damper Reso-

nance

For the entire Song:

Tempo, Reverb Type

Make settings for the above parameters,

as desired.

While holding down [], press the

desired Part button to engage Record

Ready mode.

If you want to change the value of the parameters

shared by two parts, select either part.

The [] lamp will flash according to the current

tempo.

While holding down [], press [/] to

change the initial settings and to exit

from Record Ready mode.

• You can use the Metronome while recording; however, the Metronome

sound will not be recorded.

• Never turn off the power while the recorded data is

being stored (while the lamps are flashing). Other-

wise, all recorded data will be lost.

While holding

down

While holding

down

NOTE

NOTICE

Deleting the User Song

• Rhythm cannot be deleted with this operation.

Changing the Initial Settings of the

Recorded Song

• In this status, do not press [/] or any key. Other-

wise, recording starts and the data will be deleted.

NOTE

NOTICE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-125 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info