Bedienungsanleitung Yamaha P-155 (Seite 45 von 72) (Englisch)

599481

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Detailed Settings – [FUNCTION]

P-155 Owner’s Manual

ENGLISH

F7.5: Control Change ON/OFF

Normally the instrument will respond to MIDI control

change data received from an external MIDI device or

keyboard, causing the voice on the corresponding chan-

nel to be affected by pedal and other “control” settings

received from the controlling device (the keyboard voice

is not affected).

The instrument also transmits MIDI control change

information when the pedal or other appropriate con-

trols are operated.

This function makes it possible to cancel control change

data reception and transmission so that, for example, the

instrument’s pedal and other controls can be operated

without affecting an external MIDI device.

Setting range: ON/OFF

Default setting: ON

F7.6: Panel/Status Transmit

This function causes all the current instrument panel set-

tings (selected voice, etc.) to be transmitted via the MIDI

OUT terminal.

1. Set up the panel controls as desired.

2. Connect the instrument to a sequencer via MIDI, and

set up the sequencer so it can receive the setup data.

3. Engage the Function and select .

4. Press the [+/YES] button to transmit the panel/status

data.

will appear on the display when the data has been

successfully transmitted.

F7.7: Initial Setup Send

This function lets you send the data of the panel settings

to a computer. By transmitting the panel settings and

recording them on the MIDI sequence recorder prior to

the actual performance data, the instrument will be

automatically restored to the same settings when the per-

formance is played back. You can also use this function to

change the settings of a connected tone generator to the

same settings as the instrument.

1. Set up the panel controls as desired.

2. Connect the instrument to a sequencer via MIDI, and

set up the sequencer so it can receive the setup data.

3. Engage the Function and select .

4. Press the [+/YES] button to transmit the panel/status

data.

will appear on the display when the data has been

successfully transmitted.

The following data can be sent.

•Voice selection

• [REVERB] type

• [REVERB] depth

• [EFFECT] type

• [EFFECT] depth

• Split point

•Tuning (F1)

•Dual detune (F3.2)

For information on control changes that can be used with the instru-

ment, refer to MIDI Data Format on page 62.

Setup Data:

Data that contains a set of panel settings for the instrument.

• See page 63 for a list of the Panel Data Contents transmitted by

this function.

• Receiving the transmitted data:

1. Connect the instrument via MIDI to the device to which the

setup data was transmitted previously.

2. Start sending the setup data from the device.

The instrument automatically receives the setup data, which will

be reﬂected in the panel settings.

(For the data to be accepted, the instrument that receives the

setup data should be the same model as the one that transmitted

the setup data to the sequencer.)

• For more information on transmitting and receiving setup data via

MIDI, refer to the owner’s manual for the connected MIDI device.

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-155 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-155

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info