Bedienungsanleitung Yamaha P-250 (Seite 19 von 102) (Englisch)

588674

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

P-250 19

Connecting to External Devices

Basic Operation

■Connecting to a Personal

Computer

When a computer is connected, it can be used

to control the P-250 or transfer P-250 data to or

from the computer via MIDI. For example, you

can edit the P-250's voices or store the P-250's

voice data in the computer.

There are three ways in which to connect your

P-250 to a computer:

1 USB connection (the computer’s USB port

to the P-250 [USB] connector)

2Serial connection (the computer’s serial port

to the P-250 [TO HOST] connector)

3 MIDI connection (the computer’s MIDI inter-

face or external MIDI interface to the P-250

MIDI [IN] and [OUT] connectors)

The connectors that can be used depend on the setting

of the [HOST SELECT] switch.

Different computers require different connec-

tions, as follows.

Setting the [HOST SELECT] switch

Set the [HOST SELECT] switch according to the type

of connected computer:

• Macintosh:

“Mac” (data transfer rate: 31,250bps, 1MHz clock)

•Windows:

“PC-2” (data transfer rate: 38,400bps)

1 USB connection (the computer’s USB

port to the P-250 [USB] connector)

NOTE

The P-250 does not receive or transmit MIDI Start (FAh),

Continue (FBh), or Stop (FCh) messages.

TIP

After you connect the P-250 to the computer, make sure

that Local On/Off (pages 22 and 74) is set correctly accord-

ing to the system environment.

TIP

You will need MIDI application software (sequencer, editor,

etc.) compatible with your computer platform. (Refer to the

separate Installation Guide.)

NOTE

When you connect the P-250 to a personal computer, ﬁrst

turn off the power to both the P-250 and the computer before

you connect any cables and set the HOST SELECT switch.

After you make connections and set the switch, turn on the

power to the computer ﬁrst, then to the P-250.

NOTE

If you are not using the connection between the P-250 and

your computer, you must disconnect the cable from the [TO

HOST] or [USB] connector. If the cable is connected, the P-

250 may not function properly.

[HOST SELECT] Switch Setting

Usable connectors

MIDI MIDI [IN], [OUT], [THRU]

connectors

PC-2, Mac [TO HOST]

USB [USB]

NOTE

If your system does not work properly with the connections and

settings listed above, check your software operation manual and

set the HOST SELECT switch to the proper data transfer rate.

TIP

About the USB driver:

You must install the speciﬁed USB driver (YAMAHA USB

MIDI Driver) in your computer before you can transfer data

between the computer and the P-250.

The YAMAHA USB MIDI Driver can be installed from the

included “TOOLS for P-250” CD-ROM.

The YAMAHA USB MIDI Driver supports the following OS

versions:

Windows 98, Windows 98SE, Windows Me, Windows 2000,

Windows XP

Mac OS 8.6 through 9.2.1

TIP

You will need MIDI application software (sequencer, editor,

etc.) compatible with your computer platform.

CAUTION

If you want to use a USB cable to connect the P-250 to your

computer, you must connect the USB cable before you turn

on the power to the P-250.

Also, do not turn the power of the P-250 on or off while

application software that uses USB MIDI is running.

TIP

The P-250 will begin transmission soon after the USB con-

nection is made.

NOTE

When using a USB cable to connect the P-250 to your com-

puter, make the connection directly without passing through

a USB hub.

CAUTION

Depending on the state of your computer, the operations of

the P-250 may become unstable. Do not use your computer

in a way that causes it to become unstable.

CAUTION

If you turn the power of the P-250 on or off, or connect or

disconnect the USB cable in the following states, problems

will occur in the computer system, possibly causing it to

freeze (hang up), or causing the P-250 to stop functioning:

• While installing the driver

• While starting or shutting down the operating system

• While the computer is in Save Energy (Sleep) mode

• While a MIDI application program is starting up.

[USB] connector

USB cable

Computer

P-250

HOST SELECT

MIDI PC-2 USBMac

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-250 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info