Bedienungsanleitung Yamaha P-250 (Seite 48 von 102) (Englisch)

588674

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Song Operation

48 P-250

Basic Operation

To stop recording, press the [TOP] button. The

P-250 locates the top of the song.

When the track is 1 or 2, the ﬂashing red light

changes to a steady green light. (Record mode is auto-

matically cancelled.)

5Play back the recorded song.

Press the SONG [START/STOP] button to play

back the recording.

When playback is complete, the P-250 automatically

stops and locates the top of the song. To stop playback

in the middle of a song, press the [TOP] button. You

can also pause playback by pressing the [START/

STOP] button.

6Save the recorded song.

When you turn off the power to the P-250, the

recorded performance data will be lost. If you wish to

keep the recording, save the data using the

“SaveToMemory” parameter (page 54) in the “SONG

FILE” menu.

Re-recording part of a song

This section explains how to record part of a song

again.

1Pause the song at the beginning of the part

you wish to re-record.

To move through the measures, use the B [–]/[+] but-

tons while the playback screen is displayed, or play

back the recording and press the SONG [START/

STOP] button to locate a point slightly prior to the

beginning of the part you wish to re-record.

2Select a voice or voices for recording, if nec-

essary.

Repeat Step 2 on page 47. Repeat Step 1 on page 47 if

you wish to change the previous settings.

3Select the recording method (Start/End).

Press and hold down the [REC] button, and press

the C [–]/[+] buttons repeatedly to specify how

the recording should start. Press the D [–]/[+] but-

tons repeatedly to specify how the recording

should end.

While you are holding down the [REC] button, the fol-

lowing recording method selection screen appears.

Starting methods (start):

Norm (Normal)— The existing data will be erased

after re-recording starts.

Key On— Data that exists prior to the point where

you start playing will not be erased.

Ending methods (End):

Replace— The data after the point you stop recording

will also be erased.

Punch Out— The data after the point you stop record-

ing will not be erased.

Then, resume Step 3 on page 47.

TIP

To erase recorded data from a track, use the “Channel

Clear” parameter in the “SONG SETTING” menu (page 63).

TIP

Press one of the SONG SELECT [ ] or [ ] buttons

once to return to the recording or song selection screen

during song recording or playback.

TIP

If you are not satisﬁed with the recording and wish to record

again, specify the same song and track and repeat these

steps. The original recording will be overwritten by the new

recording.

TIP

If the playback screen is not displayed, press the SONG

SELECT [ ] or [ ] button.

TIP

If you cancel recording by pressing the [REC] button,

recording stops at the point at which you press the button. If

you cancel recording by pressing the [TOP] button, the

P-250 locates the top of the song.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-250 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info