Bedienungsanleitung Yamaha P-250 (Seite 74 von 102) (Englisch)

588674

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

MIDI [MIDI SETTING]

74 P-250

Edit Operation

Press the [MIDI SETTING] button to enter MIDI Setting mode.

■Setting the MIDI transmit channel

[MidiOutChannel]

This parameter enables you to specify the channel on

which the P-250 transmits MIDI data.

Press the C [–]/[+] buttons to select the voice part (Main,

Left, Layer, Left Layer), and press the D [–]/[+] buttons to

specify a channel (Ch1—Ch16, Off: Not transmitted).

[MidiOutChannel] is a performance parameter (page

30).

■Setting the MIDI receive channel

[MidiInChannel]

You can specify which channel receives part.

Press the C [–]/[+] buttons to select a channel (Ch1—

Ch32), and press the D [–]/[+] buttons to select the MIDI

receive part (Song, Main, Left, Layer, Left Layer, Key-

board, or Off).

[MidiInChannel] is a performance parameter (page

30).

■Turning the Local Control On/Off

[LocalControl]

“Local Control On” is a state in which the P-250 pro-

duces sound from its tone generator when you play the

keyboard. In the “Local Control Off” state, the keyboard

and the tone generator are cut off from each other. This

means that even if you play the keyboard, the P-250 will

not produce sound. Instead, the keyboard data can be

transmitted via MIDI to a connected MIDI device, which

can in turn produce the sound. The “Local Control Off”

setting is useful if you wish to play an external sound

source while playing the keys on the P-250.

Press the D [–]/[+] buttons to turn Local Control on or

off.

[LocalControl] is a performance parameter (page

30).

■Specifying keyboard performance or song data

to be transmitted via MIDI [MidiOutSelect]

You can specify whether the data from your performance

on the keyboard or song playback data (including demo

songs) is sent via MIDI.

Press the D [–]/[+] buttons to select one of the following:

Keyboard....... Data from your performance on the key-

board

Song.............. Song playback data

[MidiOutSelect] is a performance parameter (page

30).

• Refer to page 61 for general information on setting the parameters.

• Refer to pages 3—5 of the separate “Data List” for information on the

default parameter settings.

ELECTRONIC PIANO

HIGHHI-MID

MASTER EQUALIZERVOICE/PERFORMANCETEMPOSONG

LOW

MIDI SETTING

CHORUS

REVERBSPLITCONTRAST

YESNO

BASS

7PERFORM. FILE

MASTER EQ EDIT

VARIATION

PERFORMANCE

VOICE EDITVIBES

GUITAR

SYNTH.PAD

E.PIANO3 HARPSI.

CLAVI.

ORGAN 1

EXIT

9 BA

G.PIANO 1

EX.TRACKS SONG FILE PANEL LOCK

RECSTART/STOP

CHRO START

TRACK2 MIDI OUT

ORGAN 2

G.PIANO 2

STRINGS

E.PIANO1

CHOIR

E.PIANO2

OTHER SETTING

LO-MID MID

DOWNSONG SETTING UP

[MIDI SETTING]

MIDI IN TO HOST

Sound source A

Channels 1-16

Port A Port B

Sound source B

Channels 17-32

MIDI data

Used for song

playback Used for song

playback

(When the channel

setting is other

than Song or Off)

Played from

the keyboard

USB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-250 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info