Bedienungsanleitung Yamaha P-250 (Seite 99 von 102) (Französisch)

588674

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

P-250 99

IMPORTANT SAFETY INSTRUCTIONS

INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,

AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.

WARNING- When using any electrical or electronic product,

basic precautions should always be followed. These precautions

include, but are not limited to, the following:

1. Read all Safety Instructions, Installation Instructions, Special

Message Section items, and any Assembly Instructions found in

this manual BEFORE making any connections, including connec-

tion to the main supply.

2. Main Power Supply Veriﬁcation: Yamaha products are manu-

factured speciﬁcally for the supply voltage in the area where they

are to be sold. If you should move, or if any doubt exists about the

supply voltage in your area, please contact your dealer for supply

voltage veriﬁcation and (if applicable) instructions. The required

supply voltage is printed on the name plate. For name plate loca-

tion, please refer to the graphic found in the Special Message Sec-

tion of this manual.

3. This product may be equipped with a polarized plug (one

blade wider than the other). If you are unable to insert the plug into

the outlet, turn the plug over and try again. If the problem persists,

contact an electrician to have the obsolete outlet replaced. Do NOT

defeat the safety purpose of the plug.

4. Some electronic products utilize external power supplies or

adapters. Do NOT connect this type of product to any power supply

or adapter other than one described in the owners manual, on the

name plate, or speciﬁcally recommended by Yamaha.

5. WARNING: Do not place this product or any other objects

on the power cord or place it in a position where anyone could walk

on, trip over, or roll anything over power or connecting cords of any

kind. The use of an extension cord is not recommended! If you

must use an extension cord, the minimum wire size for a 25’ cord

(or less) is 18 AWG. NOTE: The smaller the AWG number, the

larger the current handling capacity. For longer extension cords,

consult a local electrician.

6. Ventilation: Electronic products, unless speciﬁcally designed

for enclosed installations, should be placed in locations that do not

interfere with proper ventilation. If instructions for enclosed instal-

lations are not provided, it must be assumed that unobstructed ven-

tilation is required.

7. Temperature considerations: Electronic products should be

installed in locations that do not signiﬁcantly contribute to their

operating temperature. Placement of this product close to heat

sources such as; radiators, heat registers and other devices that pro-

duce heat should be avoided.

8. This product was NOT designed for use in wet/damp loca-

tions and should not be used near water or exposed to rain. Exam-

ples of wet/damp locations are; near a swimming pool, spa, tub,

sink, or wet basement.

9. This product should be used only with the components sup-

plied or; a cart, rack, or stand that is recommended by the manufac-

turer. If a cart, rack, or stand is used, please observe all safety

markings and instructions that accompany the accessory product.

10.

The power supply cord (plug) should be disconnected from

the outlet when electronic products are to be left unused for

extended periods of time. Cords should also be disconnected when

there is a high probability of lightning and/or electrical storm activ-

ity.

11. Care should be taken that objects do not fall and liquids are not

spilled into the enclosure through any openings that may exist.

12. Electrical/electronic products should be serviced by a quali-

ﬁed service person when:

a. The power supply cord has been damaged; or

b. Objects have fallen, been inserted, or liquids have been

spilled into the enclosure through openings; or

c. The product has been exposed to rain: or

d. The product dose not operate, exhibits a marked change in

performance; or

e. The product has been dropped, or the enclosure of the prod-

uct has been damaged.

13. Do not attempt to service this product beyond that described

in the user-maintenance instructions. All other servicing should be

referred to qualiﬁed service personnel.

14. This product, either alone or in combination with an ampli-

ﬁer and headphones or speaker/s, may be capable of producing

sound levels that could cause permanent hearing loss. DO NOT

operate for a long period of time at a high volume level or at a level

that is uncomfortable. If you experience any hearing loss or ringing

in the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period

before damage occurs.

15. Some Yamaha products may have benches and/or accessory

mounting ﬁxtures that are either supplied as a part of the product or

as optional accessories. Some of these items are designed to be dealer

assembled or installed. Please make sure that benches are stable and

any optional ﬁxtures (where applicable) are well secured BEFORE

using. Benches supplied by Yamaha are designed for seating only. No

other uses are recommended.

PLEASE KEEP THIS MANUAL

92-469-2

P-250_E.book Page 99 Monday, September 29, 2003 4:31 PM

Yamaha P-250 Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info