Bedienungsanleitung Yamaha P-255 (Seite 27 von 60) (Englisch)

583118

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Recording Keyboard Performances

P-255 Owner’s Manual

When recording in MIDI, you can record the left-hand

and right-hand parts separately as described below.

Set up the digital piano for recording.

For details, refer to Steps 1 and 3 of the section

“Simple recording of all parts (MIDI or Audio

songs)” (page 25).

If you have already recorded one of the parts, you

can play back that part as you record the other. To

stop a recorded part from playing at this time,

press the corresponding part button and verify that

its green light goes out.

Press the [REC] button to activate

Record mode.

Whenever the digital piano’s internal memory or

the USB flash drive is close to full, the message

“Enp” will be shown after you press the [REC]

button. You can start recording in such a case, but

this may cause the memory to become completely

filled before you are finished. Instead, we recom-

mend that you delete any unnecessary files (page

33) to free up some memory before proceeding.

Select the part to record.

Press the [LEFT] or [RIGHT] button and verify

that it starts flashing in red. If you wish to record

the rhythm track, press the [RIGHT] button to

select that part.

If you need to deactivate Record mode, press the

[REC] button.

If the other part already contains data:

That part will start to play when you begin record-

ing.

Start recording.

Recording will start automatically as soon as you

play a note on the keyboard. If the rhythm track is

to be recorded, recording will start as soon as you

press the [RHYTHM] button. You can also press

the [PLAY/STOP] button to start recording if you

wish to include an empty section before your per-

formance begins.

To stop recording, press either the

[PLAY/STOP] button or the [REC] button.

When you have stopped recording, dashes (“-”)

will scroll across the display to indicate that the

recorded data is being saved. When the data has

been saved, the message “End” will be shown,

followed by the song number. The recorded part’s

button will then light up in green, and the instru-

ment will automatically leave Record mode.

Play your recording.

You can play the performance just recorded by

pressing the [PLAY/STOP] button. To stop play-

back, press the [PLAY/STOP] button once again.

If necessary, you can now repeat Steps 2 to 5 to

record the other part and complete your song.

Recording individual parts (MIDI

songs)

• If the selected song contains data, the corresponding

part button(s) will light up in green. Please note that if

you record to such a part, the existing data will be over-

written.

NOTICE

• You should never turn off the digital piano while dashes

(“-”) are scrolling across the display. Failure to observe

this precaution may result in all song data, including

Import Songs (page 21), being deleted.

NOTICE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-255 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-255

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info