Bedienungsanleitung Yamaha P-35 (Seite 15 von 20) (Englisch)

583116

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

About MIDI

P-35 Owner’s Manual

MIDI functions enable you to transmit performance

data between MIDI devices

Transmitting performance data to and from

another MIDI device

Transmitting performance data to and from a

computer

You can connect the MIDI terminals of this instru-

ment to the USB terminal on the computer via an

optional USB-MIDI interface device (such as the

Yamaha UX16). To do this, you need to install the

USB-MIDI driver to the computer. For more informa-

tion, refer to the manual that came with the USB-

MIDI interface device.

Setting the MIDI Transmit Channels

In any MIDI control setup, the MIDI channels of the

transmitting and receiving devices must be matched

for proper data transfer. You can specify the channel

on which this instrument transmits MIDI data. To do

this, while holding down [GRAND PIANO/FUNC-

TION], press one of the D6 – E6 keys. The D6 key

decreases the value by 1, the D#6 key increases the

value by 1, and the E6 key restores the default value

(channel 1).

Other MIDI Settings

The MIDI settings other than the Transmit Channel

are set as listed below, and cannot be changed.

 MIDI Receive Channels:

....................................... All channels (1 – 16)

 Local Control: ............................................On

 Program Change Transmit/Receive:........Yes

 Control Change Transmit/Receive: .........Yes

MIDI Capabilities

• You cannot transmit the voice demo songs and the piano preset songs from the

instrument to another MIDI device.

• For MIDI connections, use a standard MIDI cable (optional), available at most

musical instrument stores.

• When connecting the instrument to a computer, first turn

off the power to the instrument, and then exit any open

applications on the computer before connecting any

cables. After making all connections, turn on the power to

the instrument.

• When the instrument is used as a tone module, performance data with Voices

that are not found on the instrument will not be played correctly.

• You must install an appropriate software application on the computer to be able

to transmit performance data between the instrument and a computer.

Instrument

MIDI cables

(optional)

MIDI device

MIDI [IN] terminalMIDI [OUT] terminal

MIDI [IN]

terminal

MIDI [OUT] terminal

NOTE

Instrument

USB-MIDI

interface

(optional)

Computer

MIDI [OUT]

terminal

MIDI [IN]

terminal

USB

terminal

NOTICE

NOTE

MIDI Settings

• The setting range is from 1 – 16.

• The default value is 1.

• In Dual, the keyboard performance via Voice 1 is transmitted on the specified

MIDI Transmit Channel and the keyboard performance via Voice 2 is transmitted

on the next channel number in sequence (specified channel + 1).

• No MIDI messages are output during playback of the Demo Song or Preset

Song.

E6 (Default)D6 (-1)

D#6 (+1)

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P-35 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P-35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info