Bedienungsanleitung Yamaha P90 (Seite 42 von 64) (Englisch)

516896

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

P-90 Detailed Settings – [FUNCTION]

ENGLISH

F8.8: Bulk Data Dump

You can save current song data on the P-90 as MIDI bulk

data by transferring it to a connected MIDI data ﬁler

(such as an MDF3) or a sequencer. To play back the saved

song data, send the bulk data back from the storage

device to the P-90 and follow the usual playback proce-

dure.

Bulk Data:

A complete set or extended sequence of data

Procedure

1. Record your performance on the P-90.

2. Connect the P-90 to MDF3, a MIDI data ﬁler via

MIDI, and set up the MDF3 so it will receive bulk

data.

3. Engage Function mode and select .

4. Press the [+/YES] button to begin bulk transmission.

will appear on the LED display when the data has

been successfully transmitted.

No MIDI note/panel data transmission or data reception

occurs during a bulk data dump transmit operation.

Receiving (returning) the transmitted data:

1. Connect the P-90 via MIDI to the device to which the data

was previously transmitted.

2. Start sending the data from the device.

The P-90 automatically receives the data from the unit. (At

this time, any data previously stored in the P-90 will be

erased.)

Then, follow the usual playback procedure.

(For the data to be accepted, the P-90 that receives the data

should be the same model as the one from which the data

was once transmitted to the MIDI data ﬁler.)

The reload operation cannot be executed when Demo/Preset

Song mode or the user song recorder is in operation, or when

Function mode is engaged.

For more information on transmitting and receiving bulk data

via MIDI, refer to the owner’s manual for the connected MIDI

device.

Backup:

You can back up some settings, such as voice selection and

reverb type, so that they will not be lost when you turn off the

power to the P-90.

If the backup function is turned on, the settings at power off

are effective. If the backup function is turned off, the settings

in memory are erased when you turn off the power. In this

case, when you turn on the power to the unit, the default set-

tings (the initial settings) will be used. (The factory setting

default list is found on page 55.)

However, the backup settings themselves, and the contents of

the user song recorder memory, are always backed up.

CAUTION

Even if the backup function is turned on via one of the

functions described below, the data will be retained in

memory for only about one week if the power is not

turned on during this time. If the backup period is

exceeded, all settings will be reset to their default val-

ues. If you want to retain the backup settings for

longer periods, be sure to turn the power on for a few

minutes at least once a week.

You can turn the backup function on or off for

each function group (each of the following

sub-mode functions).

1. Engage Function mode and select .

2. Press the [+/YES] button to engage the

backup function’s sub-mode, then use the

[TEMPO/FUNCTION# ▼, ▲] buttons to select

the desired sub-mode.

Press the [–/NO] or [+/YES] button to turn the

backup function on or off.

Sub-mode

F9.1: Voice

F9.2: MIDI

F9.3: Tuning

F9.4: Others

Setting range: ON/OFF

Normal setting: OFF (all groups)

F9. Backup Functions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha P90 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha P90

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info