Bedienungsanleitung Yamaha pdm 4220 (Seite 22 von 51) (Englisch)

140454

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

ENGLISH

STANDBY/ON

RECALL

DVD

AV 1 AV 2 AV 3 AV 4

AV 5

VOL PROG

A. MODE P. MODE

RETURN

AV 6 RGB 1 RGB 2

456

I/II

2-4-12

RECALL button

OPERATING INSTRUCTIONS (continued)

Activating the Split mode from the TV screen

Pressing the MULTI PICTURE button one time will display 2 pictures.

• The speaker icon can be shifted left and right by pressing the and SELECT buttons; the audio will

be output from the side on which the speaker icon is located.

• The same signal input cannot be selected for both screens at the same time.

• The TV channel can be changed by pressing the CHANNEL UP/DOWN button on the remote control.

• The signal input mode of picture-A or picture-B (the one that the speaker icon is located on) can be

selected by pressing INPUT SELECT buttons on the remote control.

• Pressing the MULTI PICTURE button once again will cancel the multi picture mode.

• Refer to the table for 2 pictures (Split) mode.

Activating the 4 pictures mode from the TV screen

Pressing the MULTI MODE button one time at the 2 pictures mode will display 4 pictures.

• Press and SELECT buttons to select picture A or picture B indicated by a red triangle. For pictures

on right, press and SELECT buttons to select picture. The input display on the selected picture

would change green.

• The TV channel can be changed by pressing the CHANNEL UP/DOWN button on the remote control.

• The audio can only be output from picture A in 4 pictures mode.

• The component signal input mode cannot be selected in pictures B. Refer to the table for 4 pictures

mode.

• Pressing the MULTI PICTURE button at the 4 picture mode will cancel the multi picture mode. And then,

pressing the MULTI PICTURE button again will display the 4 pictures.

Activating the 12 pictures mode from the TV screen

Pressing the MULTI MODE button one time at the 4 pictures mode will display 12 pictures.

• Starting from channel 1, preset channels will automatically display in sequence on the 12 windows.

• This function activates only in TV mode.

• After several seconds, it refreshes the picture one by one.

• Pressing the MULTI PICTURE button at the 12 picture mode will cancel the multi picture mode. And then,

pressing the MULTI PICTURE button again will display the 12 pictures again.

• Pressing the MULTI MODE button at the 12 picture mode will display the 2 pictures (Split) mode.

5AV1

1234

5678

9101112

SELECT/ ADJUST

button

(

, , , )

CHANNEL

UP/DOWN button

MULTI PICTURE

button

MULTI MODE

button

INPUT SELECT

button

Displaying MULTI PICTURE

If the MULTI PICTURE button on the remote control is

pressed, multi pictures will display. And then three types

of the screen can be selected by pressing the MULTI

MODE button on the remote control.

The multi picture mode will change in the following

sequence each time the MULTI MODE button is pressed.

2 pictures (Split) 4 pictures 12 pictures

013_PDM-4420_G_E 6/15/05, 9:26 PM23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha pdm 4220 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha pdm 4220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info