Bedienungsanleitung Yamaha pdm 4220 (Seite 20 von 256) (Deutsch, Englisch, Französisch, Spanisch, Schwedisch)

140454

Zoom out

Zoom in

Vorherige Seite

1/256

Nächste Seite

ENGLISH

OPERATING INSTRUCTIONS (continued)

INPUT SELECT button

INPUT SELECT

buttons

PROGRAM

SELECT button

CHANNEL

UP/DOWN buttons

ZOOM button

Input Switching

TV AV1 AV2 AV3 AV4

RGB2 RGB1 AV6 AV5

• Input can be switched by pressing the AV1~6, RGB1 or

RGB2 buttons of the remote control.

• Input can be switched to TV by pressing CHANNEL UP/

DOWN buttons or PROGRAM SELECT buttons.

• Input can be switched in the sequence of TV ➝ AV1 ➝

AV2 ➝ AV3 ➝ AV4 ➝ AV5 ➝ AV6 ➝ RGB1 ➝ RGB2 by

pressing the INPUT SELECT button of the control

panel.

CHANNEL UP/DOWN buttons

Each time the ZOOM button of the remote control is

pressed, the screen display size will change in sequence

and the status will be displayed at the bottom of the

screen.

• During TV/VIDEO signal input (AV4, AV5, AV6, RGB1

(set to [DVI-STB]) and RGB2 (set to [Component])

• The size will fix as Full mode and not change when receiving

the component signal of 1080i/50, 1080i/60, 720p/50 or 720p/60.

Display size selection diagram

Panoramic 4:3 Full

14:9Zoom C14:9L Zoom

Full

Size Switching

• During AV1~ AV3 signal input

• [Auto] is the mode using the Switch signal from the equipment

connected to AV1~AV3 terminal included in SCART connector

No.8 pin which indicate the picture format of the video source.

When Switch signal has not been detected, Default Zoom setting

in the Function Menu is used to choose.

• During TV mode

• [Auto] is the mode using WSS (Wide Screen Signals) which

identify the picture format movies and programs are broadcast in.

Various broadcast stations now transmit WSS. It can be detected

and the monitor automatically switch to the correct format.

However, some broadcasters do not transmit WSS, so this monitor

will not recognize which format is being transmitted. Therefore,

Default Zoom setting in the Function Menu is used to choose when

a WSS has not been sent or has not been detected.

Play a 4:3 image in a 16:9 screen faithfully.

Play a 4:3 image in a 16:9 screen with the

height and width of the middle of the

screen enlarged on equal scales and with

both sides appearing somewhat enlarged.

Play a 16:9 VISTA size image from a 4:3

image faithfully reproduced on the 16:9

screen.

Play a 4:3 image faithfully in a 16:9 screen

in the standard vertical size and

horizontally squeezed.*

Blanking occurs on both sides.

•

The 4:3 image is called a letterbox image.

• In some cases, some slight blanking

may remain at the top and bottom.

* An image with an aspect ratio of 16:9

shrunk horizontally to 4:3 to display in a

4:3 screen

When you want to Set the display size Display screenInput signal Remarks

(4.:3 signal)

(Vista)

(Squeeze)

4 : 3

Panoramic

Zoom

Full

Auto Full Zoom

14:9Zoom C14:9L

Auto Full Zoom

14:9Zoom C14:9L

STANDBY/ON

RECALL

DVD

AV 1 AV 2 AV 3 AV 4

AV 5

VOL PROG

A. MODE P. MODE

RETURN

AV 6 RGB 1 RGB 2

456

I/II

2-4-12

P+

RECALL button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha pdm 4220 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha pdm 4220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info