Bedienungsanleitung Yamaha pdm 4220 (Seite 29 von 256) (Deutsch, Englisch, Französisch, Spanisch, Schwedisch)

140454

Zoom out

Zoom in

Vorherige Seite

1/256

Nächste Seite

Setup hint

Select the country name by and SELECT buttons and

press OK button.

• If some required stations could not be preset in this auto tuning

function, select and preset the required station in the required

position by the manual tuning operation.

Press the OK button and it starts the auto tuning.

Set the position number(1~199 and AV00) or channel number by

(+) (–) CHANNEL UP/DOWN button.

At first, select the channel entry method, entering a two digit

channel number(CH), entering a two digit S-band number or

entering a three digit frequency(MHz), by pressing the OK button.

Enter two digit number by pressing 0~9 NUMBER buttons. If the

number is normal, then it starts the channel search.

Enter two digit number by pressing 0~9 NUMBER buttons. If the

number is normal, then it starts the channel search.

Enter three digit number by pressing 0~9 NUMBER buttons. If the

number is normal, then it starts the channel search.

Set this to Off normally. If it is set to On, AV1 (Scart) terminal

operates as TV signal output, and the screen changes to display

AV1 (Scart) input signal automatically.

This is used to input the name of the TV station within 5 letters.

After fixing the cursor on the first digit, select a letter by

and

SELECT buttons and move to next digit by ADJUST button.

Press the OK button again after finished.

• Selectable letters are “0”~”9”, ”A”~”Z”, “+”, “–”, ” ”(blank),

”,”(comma) and ”.”(period) .

Select the sound system through the 5 different settings.

Select the colour system through the 5 different settings.

If this is set to On, that position will be skipped whilst selecting

positions by PROGRAM UP/DOWN button.

This is automatically set to On for those non-broadcasting

channels.

If this is set to On, it helps to reduce the noise interference visible

on the screen, especially in the weaker signal reception areas.

After completing the fine-tuning, press the RETURN button to exit

this mode.

• The variable range is -56 ~ +56.

Press OK button at the line that is required to change order, then

the characters will change to green. And move it up or down in

the list by pressing

and SELECT buttons. And press OK

button to complete it. Press the RETURN button to exit.

Select the teletext language, depending on the area utilized

through the 4 settings: West Europe, East Europe, Cyrillic, and

Greek/Turkish.

If this is set to On, the power will be turned off when there is no

transmission signal and no operation for about 10 minutes in the

TV mode.

Selected characters

Auto Tuning

Country

Manual Tuning

Position

(C--)

(S--)

(--MHz)

Descrambler

Name

Sound System

Colour System

Skip

Fine Tuning

Sort

(A Line of position List)

Teletext Language

Auto Off

–

▲

OPERATING INSTRUCTIONS (continued)

SETUP MENU (TV mode) (continued)

Incresing the frequency data

for the mian tuner

Decreasing the frequency

data for the main tuner

Off On

Auto PAL SECAM

NTSC3.58 NTSC4.43

L L' BG

DK I

( :a letter)

Off On

1 2 3

••••••

199 AV00

(Page1) (Page2) (Page3)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha pdm 4220 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha pdm 4220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info