Bedienungsanleitung Yamaha PF500 (Seite 12 von 56) (Französisch)

516898

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

12 Accessory CD-ROM Installation Guide (PF-500)

English

Setting up OMS

(For USB connection)

The OMS studio setup file for the PF-500 is contained in the included

CD-ROM. This studio setup file is used for setting up OMS.

n Before performing the following procedure, the OMS and USB MIDI

Driver should be installed.

1 Use a USB cable to connect the USB terminal of the computer (or

the USB hub) to the USB terminal of the PF-500 and turn the PF-

500’s power on.

2 Start the computer.

3 Insert the included CD-ROM into the CD-ROM drive of your

Macintosh computer.

The CD-ROM icon appears on the desktop.

4 Double-click on the CD-ROM icon, “OMS_”, and “OMS Setup

for YAMAHA.”

The ﬁle “PF-500-USB” appear. Copy these to the hard disk on

your computer.

n If you want to use a serial connection instead of using USB, please

copy and use the following files.

• “PF-500-Printer”

Use this for serial connection via the printer port.

• “PF-500-Modem”

Use this for serial connection via the modem port.

n When using the serial connection for the File Utility, set the MIDI

Out:/ MIDI In: setting in the OMS Port Setup to MIDI Time Piece-

Printer, or MIDI Time Piece-Modem.

5 Double-click on the “PF-500-USB” ﬁle to start the OMS Setup.

6 After starting the OMS Setup, the Studio setup ﬁle double-clicked

in step #5 opens.

n If “ ” is not indicated at the right of the setup file name, select

“Make Current” from the “File” menu and execute the save oper-

ation.

The OMS studio setup has been completed.

n After the OMS studio setup above has been completed, your com-

puter will recognize only the PF-500 as a MIDI instrument. If you

use another MIDI instrument in addition to the PF-500 or you add

a second PF-500 to the existing system, you should create an orig-

inal Studio Setup file. For details, refer to the on-line manual sup-

plied with the OMS.

Indicates this setup is available

Depending on the Macintosh and operating system version that

you are using, the included studio setup file for the PF-500 still

may not work even after you have performed the above steps.

(MIDI transmission and reception will not be possible even if the

setup is valid.)

In this case, use the following procedure to re-create the setup file.

1 Connect the PF-500 and Macintosh via USB or serial cable,

and turn on the power of the PF-500.

2 Start up OMS Setup, and from the “File” menu, choose “New

setup.”

3 The OMS driver search dialog box will appear. Check

[Modem] or [Printer] if you are using a serial connection.

Uncheck both of these if you are using a USB connection.

4 Click the [Find] button to search for the device.

When the search has succeeded, the OMS Driver Setting dia-

log box will display the following.

For a USB connection: USB-MIDI 1

For a serial connection: MIDI Time Piece-Modem (Printe_)

• If the device was found correctly, click the [OK] button to

proceed.

• If the device was not found, re-check that the cable connec-

tions are correct, and repeat the procedure from step 1.

5 Make sure that the port is shown below the device that was

found. (In the case of the PF-500, this will be a name such as

USB-MIDI, Modem, or Printer.) Check the check box for the

port, and then click the [OK] button.

6 A dialog box will appear, allowing you to name the ﬁle that

will be saved. Input the desired ﬁlename, and click [Save].

This completes OMS setup.

7 From the “Studio” menu, choose “Test,” and click the port

icon.

If a channel sounds on the PF-500, the system is operating cor-

rectly.

For details on using OMS, refer to OMS_2.3_Mac.pdf, included

with OMS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PF500 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PF500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info