Bedienungsanleitung Yamaha PSR-1700 (Seite 74 von 94) (Englisch)

669113

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

Optional Yamaha FC4 or FC5 footswitches and/or or

FC7 foot controllers can be plugged into either or both

of the rear-panel PEDAL jacks and used to control a

wide range of functions.

Pedal Assign

PEDAL

(FC7) (FC5)

The functions listed below can be assigned to the footswitch or foot con-

troller connected to the PEDAL 1 and PEDAL 2 jacks by pressing the appro-

priate function button while holding the PEDAL ASSIGN [1] or [2] button.

PEDAL ASSIGN

STYLE

SELECT

AUTO

ACCOMP

Example: Assigning AUTO ACCOMP

on/off switching to the pedal.

PEDAL ASSIGN

PEDAL

Assignable Footswitch Functions (FC4, FC5)

• AUTO ACCOMP ON/OFF

• FADE IN/OUT

• INTRO

• VARIATION [A]

• VARIATION [B]

• FILL IN 1

• FILL IN 2

• BREAK

• ENDING

• ACCOMPANIMENT CON-

TROL START/STOP

• SYNC-START ON/OFF

• CHORD 2 FINGERING

• EFFECT ON/OFF

• HARMONY ON/OFF

• SONG RESET

• SONG PLAY/STOP

• GATE TIME

• STEP SIZE

Assignable Foot Controller Function (FC7)

NOTES

• Using the foot controller while an Assignable Foot Controller Function is

assigned has the same effect as holding the corresponding panel but-

ton.

• The PEDAL 1 jack is initially assigned to sustain control. A footswitch

connected to this jack functions as a damper pedal, controlling sustain.

Press the pedal to sustain notes after the keys are released.

• The PEDAL 2 jack is initially assigned to the voice volume control (MIDI

Expression control). An FC7 foot controller connected to this jack can

be used to control voice volume: press the pedal forward to increase

voice volume; backward to decrease voice volume.

• A footswitch or foot controller can be returned to its default function by

pressing it while holding the corresponding PEDAL ASSIGN button.

• The ON/OFF operation of a footswitch or the control direction of a foot

controller can be reversed by double-clicking the corresponding PEDAL

ASSIGN button (press the button twice rapidly) without pressing the

pedal.

• If the GATE TIME or STEP size parameter is assigned to PEDAL 1, the

parameter will be decremented each time the pedal is pressed. If as-

signed to PEDAL 2, the parameter will be incremented each time the

pedal is pressed.

• For CHORD 2 mode control press the [FINGERING] button while hold-

ing the appropriate PEDAL ASSIGN button. Then the footswitch can be

pressed while the Auto Accompaniment is playing to switch to the

CHORD 2 mode. The CHORD 2 mode remains active only as long as

the footswitch is pressed.

• The pedal assignment can be stored in the Registration Memory.

VOICE • VOLUME (24 steps) • DSP DEPTH (15 steps) • PAN (14 steps)

ACCOMP • VOLUME (24 steps)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-1700 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info