Bedienungsanleitung Yamaha PSR-1700 (Seite 77 von 94) (Englisch)

669113

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

■ Clock Mode

Reception of an external MIDI clock signal can be enabled or disabled as required. When disabled, all of the

time-based functions (Auto Accompaniment, SONG MEMORY, etc.) are controlled by the PSR-1700/PSR-

2700’s own internal clock, the speed of which is set by the [TEMPO] button. When MIDI clock reception is

enabled, however, all timing is controlled by an external MIDI clock signal received via the MIDI IN terminal

(the [TEMPO] setting has no effect).

NOTES

• If clock reception is enabled but no MIDI clock signal is received for more than 400

milliseconds, external clock reception is automatically disable and normal internal

clock operation resumes.

• If you attempt to change the tempo setting when MIDI clock reception is enabled,

“Tempo

=External” will appear on the LCD display panel.

ZPress the [RECEIVE CH/CL/COM] Button & Select “Clock Rx” .........................................................

Press the [RECEIVE CH/CL/COM] button, then use the [+] and [–]

buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/

COM] button itself to select “Clock Rx” on the LCD display panel (“Clock

Rx” is the next step above MIDI channel 16).

Use the [+/–] button in the number-button row to select the desired clock

mode. The disable and enable modes are selected alternately each time the

[+/–] button is pressed, and the selected mode appears on the right digit of

the LCD display panel (“Clock Rx=0:Off” for disable; “Clock Rx:=1:On”

for enable).

–

_ _

XSelect the Desired Mode ........................................................................................................................

Use the [+/–] button in the number-button row to select the desired start

mode. The start/stop modes are selected in sequence each time the [+/–]

button is pressed: “Cmnd Rx=0:Off”, “Cmnd Rx=1:Accomp”, or “Cmnd

Rx=2:Song”.

ZPress the [RECEIVE CH/CL/COM] Button & Select “Cmnd Rx”.........................................................

Press the [RECEIVE CH/CL/COM] button, then use the [+] and [–]

buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/

COM] button itself to select “Cmnd Rx” on the LCD display panel (“Cmnd

Rx” is the next step above “Clock Rx” — or the next step

below MIDI

channel 1).

–

_ _

■ Start/Stop Mode

This function determines the effect of external MIDI start and stop signals. There are three start/stop modes,

as follows:

Mode “0” Start/stop reception disabled.

Mode “1” MIDI start and stop commands start and stop the PSR-1700/PSR-2700 Auto Accompani-

ment feature.

Mode “2” MIDI start and stop commands start and stop the PSR-1700/PSR-2700 SONG MEMORY

feature.

RECEIVE

CH/CL/COM

MODE

................

0 RX OFF

1 MULTI

2 REMOTE

3 CHORD

4 ROOT

RECEIVE

CH/CL/COM

MODE

................

0 RX OFF

1 MULTI

2 REMOTE

3 CHORD

4 ROOT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-1700 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info