Bedienungsanleitung Yamaha PSR 200 (Seite 8 von 29) (Englisch)

460051

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

THE SPLIT MODE

The PSR-200/PSR-300 SPLIT mode allows you to play two

voices at once — one with the left hand and one with the right.

The left-hand voice can be played to the left of the “split

point,” set as described below, and the right-hand voice can be

played to the right of the split point.

Press the [MODE] button as many times as necessary

until the SPLIT indicator lights — this selects the SPLIT

mode.

If necessary, set the split point as described below:

Setting the SPLIT Mode Split Point:

The split point for the SPLIT mode is initially set at the

C3 key. It can be set to any other key by pressing the de-

sired split-point key while holding the [SPLIT POINT

CHANGE] button.

The split point is shown on the MULTI DISPLAY for

as long as the [SPLIT POINT CHANGE] button is held.

The C3 key, for example, would be displayed as “C3”.

F#2 would be displayed as “F

2”. The sharp is indicated

by the lit bar between the “F” and the “2.”

The SPLIT mode split point is retained in memory and

will be recalled whenever the SPLIT mode is selected.

Note that the split-point key is included in the right-

hand section of the keyboard.

To initialize the split point to its original default value, turn the

[POWER] button on while holding the [SPLIT POINT CHANGE]

button. The SINGLE FINGER and FINGERED split points (de-

scribed later) are also initialized by this procedure.

Select the right-hand and left-hand voices as required.

When the SPLIT mode is first selected the current voice

is assigned to the right-hand keys. If no other left-hand

voice has been selected since the PSR-200/PSR-300 was

turned ON, the ELECTRIC BASS voice (number 82) will

be assigned to the left-hand keys.

The left-hand voice is octave-shifted to provide the best sound

in the left-hand range.

Changing the Right and Left-hand Voices:

Make sure the [VOICE/STYLE] button VOICE indicator

is lit (press the [VOICE/STYLE] button once if it isn’t).

To change the right-hand voice press a key to the right

of the split point. The current right-hand voice number

will be shown on the MULTI DISPLAY and a new right-

hand voice can be selected in the normal way.

To change the left-hand voice press a key to the left of

the split point. The current left-hand voice number will be

shown on the MULTI DISPLAY and a new left-hand

voice can be selected in the normal way.

When playing in the SPLIT mode, the MULTI DISPLAY will switch

between the left- and right-hand voice numbers according to whether

notes are played on the left- or right-hand section of the keyboard.

The PSR-300 DUAL indicator flashes according to the left- and right-

hand section DUAL mode settings when the SPLIT and DUAL

modes are used together.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR 200 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PSR 200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info