Bedienungsanleitung Yamaha PSR-225GM (Seite 37 von 121) (Englisch)

635416

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

PLAYING VOICES — THE VOICE MODE

5 Exit the Function mode.

Once you’ve made all desired settings, press one of the other mode but-

tons (SONG, STYLE, or VOICE).

Function Parameters — Split Voice

The Function parameters provide all settings for the Split voice. Like the similar settings in the Main

Voice mode, these settings let you change or enhance the sound of the Split voice separate from the

Main voice. These settings include:

• Volume

• Octave

• Pan

• Reverb Send Level

• Chorus Send Level

• DSP Effect Send Level

Function Parameters

No. Parameter Name Display Name Range/Settings

F21 Split Voice Volume S.Volume 0 — 127

F22 Split Voice Octave S.Octave -2 —

2 (octaves)

F23 Split Voice Pan S.Pan -7 (full left) —

0 (center) —

7 (full right)

F24 Split Voice Reverb S.RevLvl 0 — 127

Send Level

F25 Split Voice Chorus S.ChoLvl 0 — 127

Send Level

F26 Split Voice DSP Effect S.DspLvl 0 — 127

Send Level

F27 Split Voice S.Voice 1 — 238

F28 Split On/Off Split on, off

F29 Split Point SplitPnt 000 — 127

Description

This determines the volume of the Split voice, letting

you create an optimum mix with the Main voice.

This determines the octave range for the Split voice.

Use this to set the most suitable range for the Split

(lower) voice.

This determines the pan position of the Split voice in

the stereo image. For a spacious sounding effect, set

this value at or near -7, and set the Main Voice Pan

(page 31) at the opposite positive value.

This determines how much of the Split voice’s signal is

sent to the Reverb effect. (See page 40.) Higher values

result in a louder Reverb effect for the Split voice.

This determines how much of the Split voice’s signal is

sent to the Chorus effect. (See page 41.) Higher values

result in a louder Chorus effect for the Split voice.

This determines how much of the Split voice’s signal is

sent to the DSP effect. (See page 42.) Higher values

result in a louder DSP effect for the Split voice.

This determines the Split voice. (See list on page 109.)

This turns the Split Voice mode on/off. This can also be

controlled by a connected footswitch. (See page 91.)

This determines the highest key for the Split voice and

sets the Split “point” — in other words, the key that

separates the Split (lower) and Main (upper) voices.

(The Split voice sounds up to and including the Split

Point key.) The default Split Point is 059 (B2). The

value can also be set directly by pressing the desired

key while this parameter is selected. While this is being

set, the keyboard does not produce any sound. After

setting this, make sure to select a different parameter

or exit the Function mode before playing the keyboard.

The Split Point setting is related to and affected by the

Accompaniment Split Point setting. (See page 58.)

• Split Voice

• Split On/Off

• Split Point

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-225GM Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PSR-225GM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info