Bedienungsanleitung Yamaha PSR-225GM (Seite 115 von 121) (Englisch)

635416

115

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

115

NOTE:

*1 By default (factory settings) the PSR-225 ordinarily functions as a 16-

channel multi-timbral tone generator, and incoming data does not affect the

panel voices or panel settings. However, the MIDI messages listed below do

affect the panel voices, auto accompaniment, and songs.

• MIDI Master Tuning

• System exclusive messages for changing the Reverb Type, Chorus Type,

and DSP Type.

The Remote Channel can be designated by using Function parameter #81.

The messages received over the set channel are handled in the same way as

key data received from the PSR-225 itself. The following messages can be

received over the designated channel set in this Function parameter; all other

messages will be ignored.

• Note ON

• Note OFF

• Control change : Bank select MSB, LSB (Main Voice Only), Modulation,

Volume, Expression, Sustain, All sound off, All note off

• Program Change (Main Voice Only)

• Pitch Bend

*2 Messages for these control change numbers cannot be transmitted from the

PSR-225 itself. However, they may be transmitted when playing the

accompaniment or using the Harmony effect.

*3 Exclusive

<GM System ON> F0H, 7EH, 7FH, 09H, 01H, F7H

• This message automatically restores all default settings for the instrument,

with the exception of MIDI Master Tuning.

<MIDI Master Volume> F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H

• This message allows the volume of all channels to be changed simulta-

neously (Universal System Exclusive).

• The values of “mm” is used for MIDI Master Tuning. (Values for “ll” are

ignored.)

<MIDI Master Tuning> F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc, F7H

• This message simultaneously changes the tuning value of all channels.

• The values of “mm” and “ll” are used for MIDI Master Tuning.

• The default value of “mm” and “ll” are 08H and 00H, respectively. Any

values can be used for “n” and “cc.”

• This is used for saving (recording) User data (User songs, User One Touch

Setting, and EZ Chord).

<Internal Clock, External Clock> (Receive Only)

F0H, 43H, 73H, 01H, 02H, F7H (Internal Clock)

F0H, 43H, 73H, 01H, 03H, F7H (External Clock)

• These messages control the clock setting for the accompaniment.

<Reverb Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 00H, mmH, llH, F7H

• mm : Reverb Type MSB

• ll : Reverb Type LSB

Refer to the Effect Map (page 116) for details.

<Chorus Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 20H, mmH, llH, F7H

• mm : Chorus Type MSB

• ll : Chorus Type LSB

Refer to the Effect Map (page 116) for details.

<DSP Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 40H, mmH, llH, F7H

• mm : DSP Type MSB

• ll : DSP Type LSB

Refer to the Effect Map (page 116) for details.

<DRY Level> F0H, 43H, 1nH, 4CH, 08H, 0mH, 11H, llH, F7H

• ll : Dry Level

• 0m : Channel Number

*4 It is possible to switch between External and Internal Clock.

*5 When the accompaniment is started, an FAH message is transmitted. When

accompaniment is stopped, an FCH message is transmitted. When the clock

is set to External, both FAH (accompaniment start) and FCH (accompani-

ment stop) are recognized.

No MIDI messages can be received or transmitted in the Song mode.

MIDI IMPLEMENTATION CHART

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-225GM Seite 115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PSR-225GM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info