Bedienungsanleitung Yamaha PSR-330 (Seite 84 von 90) (Englisch)

635588

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

MIDI Implementation Chart

*0 By default (factory settings) the PSR-330 ordinarily functions as a

16 channel multi-timbral tone generator. The Remote Channel can

be designated with the panel settings. The designated channel can

be controlled in the same manner as the PSR-330’s keyboard ON/

OFF control. The following messages can be received by the

designated channel in this mode. All other messages will be

ignored.

• Note ON

• Note OFF

• Control change : Bank select MSB, LSB

Volume

Pan

Sustain

Reverb depth

All sound off

Reset all controller

• Program change

• Exclusive

*1 BANK SELECT

• The bank select MSB is used for melody and rhythm voice

switching.

(MSB 00H: Melody Voice/MSB 7FH: Rhythm Voice)

• Refer to the Voice List for details on LSB.

*2 RPN transmission/reception

Pitch bend Sensitivity BnH, 64H, 00H, 65, 00H

Fine Tune BnH, 64H, 01H, 65, 00H

Course Tune BnH, 64H, 02H, 65, 00H

Null BnH, 64H, 7FH, 65, 00H

*3 Pitch Bend, modulation, expression, sustain, sostenuto and RPN

are returned to their default values. Also, resets the portamento

control.

*4 EXCLUSIVE

<GM System ON> F0H, 7EH, 7FH, 09H, 01H, F7H

• All parameters except MIDI Master Tuning settings are reset to

their default values.

<DISK ORCHESTRA ON> F0H, 43H, 73H, 01H, 14H, F7H

<DISK ORCHESTRA OFF> F0H, 43H, 73H, 01H, 13H, F7H

<MIDI MASTER VOLUME> F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H

• Allows the volume of all channels to be changed simulta-

neously. (Universal System Exclusive)

• “mm” is used as the MIDI Master Volume value (“ll” is ignored).

• The relationship between the MIDI Master Volume value and

the real volume is the same as the Control Change Master

Volume.

• The default value for “mm” is 7FH.

F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc, F7H

• Simultaneously changes the tuning of all channels.

• “mm, ll” is used as the MIDI Master Tuning Value. The tuning

value is represented as follows:

T=M-128 (28<=M<=228)

T: Tuning Value (in cents)

M: is decimal value represented by 1-byte using bits 0..3 of

“mm” as the MSB and bits 0..3 of “ll” as the LSB.

• The default values for “mm” and “ll” are 08H, 00H. Also, n and

cc are recognized.

• This value is not reset by a GM System ON or Reset All

Controllers message.

Resist Memory

F0H, 43H, 73H, 4CH, 06H, 09H, 0nH, 0nH, 0nH, 0nH, [DATA],

sum, F7H

0nH, 0nH, 0nH, 0nH : Data length (nnnnH Byte)

sum : Check Sum

User Song Data

F0H, 43H, 73H, 4CH, 06H, 0AH, 0nH, 0nH, 0nH, 0nH, 0nH, 0nH,

[DATA], sum, F7H

0nH, 0nH, 0nH, 0nH, 0nH, 0nH : Data length (nnnnnnH Byte)

sum : Check Sum

<Section Control> F0H, 43H, 7EH, 00H, ss, dd, F7H

• This message is related to the SW section operation.

ss : 00H-07H INTRO

08H MAIN A

09H-0FH MAIN B

10H FILL IN AA

11H-17H FILL IN BB

18H FILL IN AB

19H-1FH FILL IN BA

20H-27H ENDING

dd : Switch ON/OFF 7FH (ON)/ 00H (OFF)

<START, STOP Control> F0H, 43H, 6nH, xx, F7H

• This message controls the Start/Stop for the Style. (received

only)

n : Ignores the Device Number.

xx : 7A= Reset Start, 7D= Stop & Rewind

<TEMPO CONTROL> F0H, 43H, 7EH, 01H, tt, tt, tt, tt, F7H

• This message is used to change the Tempo Value.

tt, tt, tt, tt : Tempo Data

<Internal Clock, External Clock> (Received Only)

F0H, 43H, 73H, 01H, 02H, F7H (Internal Clock)

F0H, 43H, 73H, 01H, 03H, F7H (External Clock)

• This message controls the Clock Mode of the Style.

<XG System ON> (Received Only)

F0H, 43H, 1nH, 4CH, 00H, 00H, 7EH, 00H, F7H

n : ignores the Device Number.

• All parameters except MIDI Master Tuning are reset to their

default values.

• Remote Channel setting is canceled.

• This message requires approximately 50ms to execute, so

sufficient time should be allowed before the next message is

sent.

F0H, 43H, 1nH, 4CH, aaH, bbH, ccH, ddH, ..., F7H

n: Device number is ignored.

aa, bb, cc: address High, Mid, Low

dd: data (successive transmission and reception are

possible within the amount of data shown in the

following Table-1)

• For more details refer to Table-1.

Caution:The PSR-330 corresponds to the XG parameters in

Table-1, but this is only a portion of XG parameters.

The PSR-330 does not completely correspond to the

XG format.

*5 It is possible to switch between the External and Internal Clocks.

*6 Start/Stop commands for the style can only be received when

External Clock is ON.

*7 All MIDI messages will be ignored when in the Song Mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-330 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info