Bedienungsanleitung Yamaha PSR-410 (Seite 11 von 61) (Englisch)

635589

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

02341

–

_ _

2-2: The [+] and [−] Buttons The [+] and [−] buttons immediately to the right of the MULTI DIS-

PLAY can be used to increment (increase by one) or decrement (decrease

by one) the currently selected parameter. Press the [+] button briefly to in-

crement the parameter value, or the [−] button to decrement. If you hold the

[+] or [−] button down, the value will increment or decrement continuously

— simply release the button when the desired value has been reached.

The number buttons — to the right of the [+] and [−] buttons — allow

direct numeric entry of the desired value, and are therefore the fastest way

to edit in many situations.

To select a voice, for example, choose one of the 128 voices — num-

bered “01” through “128” — shown on the panel VOICE list, then enter its

number using the number buttons. To select “HARMONICA” (number 23),

for example, first press [2] then [3]. The number “23” should then appear

on the MULTI DISPLAY.

The [+/−] button is used to switch between positive and negative values

with parameters that allow negative values (Transpose, Tuning, Octave, and

Pan, for example). A “−” appears before negative values on the MULTI

DISPLAY.

When selecting voice numbers the [+/−] button is used to enter the hun-

dreds digit of the voice number (the button alternately selects no hundreds

digit or “1”), as required, prior to entering the tens and ones digits. The [1]

number button cannot be used to enter the hundreds digit when selecting

voices.

Values outside the range of the selected parameter can not be entered.

RESET

–+

2-3: The Number Buttons

● Yes/No Confirmation

Some operations that change important settings or erase data may require you

to confirm your choice by pressing the [YES] or [NO] button. When a choice needs

to be confirmed the ARE YOU SURE? indicator will flash and a digitally sampled

voice will ask “Are you sure?”. Press the [YES] button to execute the specified op-

eration or the [NO] button to cancel and leave the settings or data unaffected.

If you don’t want to hear the “Are you sure?” confirmation sound, hold down the

[NO] button while initially turning the power switch on. To restore the confirmation

sound, turn the power switch off, then turn it back on again while holding down the

[YES] button. The on/off status of the confirmation sound is retained in memory

even when the power switch is turned off as long as batteries are installed on an

AC adaptor is connected.

ARE YOU SURE ?

NOYES

NOTES

• After editing a parameter other than [VOICE SELECT], the [VOICE

SELECT] parameter will automatically be re-selected after a brief

delay.

• If you attempt to change a parameter that can not be edited in the

current mode, “---” will appear on the MULTI DISPLAY.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-410 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info