635589
48
Zoom out
Zoom in
Vorherige Seite
1/61
Nächste Seite
46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+
1
_ _
9
+
1
_ _
9
Clock Mode
Reception of an external MIDI clock signal can be enabled or disabled as required. When disabled, all of the
PSR-410s time-based functions (Auto Accompaniment, SONG MEMORY, etc.) are controlled by its own inter-
nal clock, the speed of which is set by the PSR-410 [TEMPO] button. When MIDI clock reception is enabled,
however, all timing is controlled by an external MIDI clock signal received via the PSR-410 MIDI IN terminal
(the PSR-410 [TEMPO] setting has no effect).
NOTES
• If clock reception is enabled but no MIDI clock signal is received for
more than 400 milliseconds, external clock reception is automatically
disable and normal internal clock operation resumes.
• If you attempt to change the tempo setting when MIDI clock reception
is enabled, “EC” will appear on the MULTI DISPLAY.
ZPress the [RECEIVE CH/CL/COM] Button & Select “cL” ....................................................................
Press the [RECEIVE CH/CL/COM] button, then use the [+] and []
buttons, the number buttons, or the [RECEIVE CH/CL/COM] button
itself to select cL on the MULTI DISPLAY (cL is the next step above
MIDI channel 16).
XSelect the Desired Mode ........................................................................................................................
Use the [+/] button in the number-button row to select the desired start
mode. The start/stop modes are selected in sequence each time the [+/]
button is pressed, and the selected mode number appears on the left digit of
the MULTI DISPLAY.
RECEIVE
CH/CL/
COM
MODE
................
0 RX OFF
1 MULTI
2 REMOTE
3 CHORD
4 ROOT
Mode number
XSelect the Desired Mode ........................................................................................................................
Use the [+/] button in the number-button row to select the desired clock
mode. The disable and enable modes are selected alternately each time the
[+/] button is pressed, and the selected mode appears on the left digit of
the MULTI DISPLAY (d for disable; E for enable).
Clock mode
Start/Stop Mode
This function determines the effect of external MIDI start and stop signals. There are three start/stop modes,
as follows:
Mode “0” Start/stop reception disabled.
Mode “1” MIDI start and stop commands start and stop the PSR-410 Auto Accompaniment feature.
Mode “2” MIDI start and stop commands start and stop the PSR-410 SONG MEMORY feature.
ZPress the [RECEIVE CH/CL/COM] Button & Select “cd” ....................................................................
Press the [RECEIVE CH/CL/COM] button, then use the [+] and []
buttons, the number buttons, or the [RECEIVE CH/CL/COM] button it-
self to select cd on the MULTI DISPLAY (cd is the next step above
cL or the next step
below MIDI channel 1).
RECEIVE
CH/CL/
COM
MODE
................
0 RX OFF
1 MULTI
2 REMOTE
3 CHORD
4 ROOT
MIDI
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha PSR-410 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info