635589
53
Zoom out
Zoom in
Vorherige Seite
1/61
Nächste Seite
51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Reset Procedures & Page Memory Default Settings
All PSR-410 page memory settings are retained in memory even when the power switch is turned OFF as
long as the PSR-410 is powered by batteries or an AC adapter. You can, however, restore the factory default set-
tings for all four page memories or a single specified page memory by following the procedures outlined below.
System Reset
ZPress the POWER switch to turn the PSR-410 power OFF.
XTurn the power back ON while holding both the [+] and [–] buttons.
clr will appear on the MULTI DISPLAY while the data is being reset.
IMPORTANT
Executing the System Reset function will erase any existing set-
tings all page memory locations!
Page Reset
ZSelect the PAGE MEMORY Number You Want to Reset.....................................................................
Select the PAGE MEMORY number you want to reset (page 41).
XPress the [MIDI BULK DUMP/PAGE COPY] Button.............................................................................
Press the [MIDI BULK DUMP/PAGE COPY] button. The ARE YOU
SURE? indicator will flash and the PSR-410 will ask Are you sure?. At
the same time 1dP, 2dP, 3dP, or 4dP will appear on the MULTI
DISPLAY, depending on the selected PAGE MEMORY number.
PAGE
MEMORY
PAGE #
MIDI BULK
DUMP/
PAGE COPY
CSelect a “cL” Display .............................................................................................................................
Use the [+] and [–] buttons or the data dial to select 1cL, 2cL,
3cL, or 4cL (the number corresponds to the selected page number).
RESET
–+
0
VPress [YES] to Reset ..............................................................................................................................
Press the [YES] button to execute the page reset function, or the [NO]
button to cancel and return to the PAGE MEMORY number selection mode
(step 1, above). All settings in the selected page will be reset to their initial
values.
When the data has been reset the PSR-410 will automatically return to
the VOICE SELECT mode.
IMPORTANT
Executing the Page Reset function will erase any existing set-
tings all selected page memory location!
ARE YOU SURE ?
NOYES
POWER
ON/ OFF
RESET
–+
53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha PSR-410 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info