Bedienungsanleitung Yamaha PSR-540PC (Seite 75 von 160) (Englisch)

635592

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

● Voice R1, R2, L

• When one of the DSP types belonging to the Insertion Effect (page

50) is selected, the effect will be exclusively applied to the Voice R1

and not to the Voice R2/L. Therefore the DSP depth for the Voice R2/

L cannot be changed. Also, the DSP depth for the Voice R1 cannot be

altered depending on the selected Insertion Effect type.

• Save any part settings you want to keep to the PSR-540 Registration

Memory (page 54). The voice part settings are temporary and will be

lost if the power is turned off, a different R1 panel voice is selected

while the Voice Set function (page 120) is on, or a Registration

Memory is recalled.

● Song

• Make sure to first select the appropriate song for which you wish to

set the part before calling up the relevant display.

• Any part settings made for the song will be lost if you turn off the

power, select another song, or select the Style mode (after finishing

the part settings). To prevent this, make sure to select the Recording

mode and save the song data to disk (page 78).

● Auto Accompaniment

• Only drum kit voices (page 31) can be selected for the RHYTHM

MAIN track.

• When using auto accompaniment part settings for the RHYTHM SUB

track, any of the voices can be selected but no chord changes will

occur when using Auto Accompaniment.

• Make sure to first select the appropriate style for which you wish to

set the part before calling up the relevant display.

• Auto accompaniment part settings can even be set while an

accompaniment is playing.

• Auto accompaniment part settings affects all sections of the selected

style.

• Save any part settings you want to keep to the PSR-540 Registration

Memory (page 54). The Auto accompaniment part setting are

temporary and will be lost if the power is turned off, a different style is

selected while the Voice Set function (page 120) is on, or a

Registration Memory is recalled.

Voice Change

In addition to being able to change the voices played from the keyboard (R1, R2, L),

you can also change the voices for each track of the auto accompaniment and songs.

Press the [VOICE CHANGE] button.

The [VOICE CHANGE] lamp lights.

Select the part for which you want to change voices.

Parts can be selected from the following buttons (depending on the selected

mode: Style or Song):

● Voice ................................. PART ON/OFF [VOICE R1], [VOICE R2], [VOICE L]

buttons

● Accompaniment track ....... [TRACK9]-[TRACK16] buttons (Style mode)

● Song track ......................... [TRACK1]-[TRACK16] button (Song mode)

Select a voice.

Use the data dial, the [+/YES] button, the [-/NO] button or the number buttons

[1]-[0].

Refer to the Voice List (page 123).

Repeat steps #2 and #3 as often as needed for other parts/

tracks.

Press the [EXIT] button to exit from the Voice Change screen.

Part Settings

RhM=216 StndKit1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-540PC Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info