Bedienungsanleitung Yamaha PSR-9000 versie 2 Portatone (Seite 5 von 214) (Englisch)

476367

Zoom out

Zoom in

Vorherige Seite

1/214

Nächste Seite

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Using the Floppy Disk Drive (FDD) and Floppy Disks

Be sure to handle ﬂoppy disks and treat the disk drive with

care. Follow the important precautions below.

■

Compatible Disk Type

3.5

2DD and 2HD type ﬂoppy disks can be used.

■

Inserting/Ejecting Floppy Disks

●

To insert a ﬂoppy disk into the disk drive:

• Hold the disk so that the label of the disk is facing upward and

the sliding shutter is facing forward, towards the disk slot.

Carefully insert the disk into the slot, slowly pushing it all the

way in until it clicks into place and the eject button pops out.

●

To eject a ﬂoppy disk:

• Before ejecting the disk, be sure to conﬁrm that the FDD is

stopped (check if the DISK IN USE lamp is off). Press the eject

button slowly as far as it will go; the disk will automatically pop

out. When the disk is fully ejected, carefully remove it by hand.

• If the eject button is pressed too quickly, or if it is not pressed

in as far as it will go, the disk may not eject properly. The eject

button may become stuck in a half-pressed position with the

disk extending from the drive slot by only a few millimeters. If

this happens, do not attempt to pull out the partially ejected

disk, since using force in this situation can damage the disk

drive mechanism or the ﬂoppy disk. To remove a partially

ejected disk, try pressing the eject button once again, or push

the disk back into the slot and then repeat the eject procedure.

●

Never attempt to remove the disk or turn the power off dur-

ing recording, reading and playing back. Doing so can dam-

age the disk and possibly the disk drive.

●

Be sure to remove the ﬂoppy disk from the disk drive before

turning off the power. A ﬂoppy disk left in the drive for

extended periods can easily pick up dust and dirt that can

cause data read and write errors.

■

Cleaning the Disk Drive Read/Write Head

●

Clean the read/write head regularly. This instrument employs

a precision magnetic read/write head which, after an

extended period of use, will pick up a layer of magnetic par-

ticles from the disks used that will eventually cause read and

write errors.

●

To maintain the disk drive in optimum working order Yamaha

recommends that you use a commercially-available dry-type

head cleaning disk to clean the head about once a month.

Ask your Yamaha dealer about the availability of proper

head-cleaning disks.

●

Never insert anything but ﬂoppy disks into the disk drive.

Other objects may cause damage to the disk drive or ﬂoppy

disks.

■

About the Floppy Disks

●

To handle ﬂoppy disks with care:

• Do not place heavy objects on a disk or bend or apply pres-

sure to the disk in any way. Always keep ﬂoppy disks in their

protective cases when they are not in use.

• Do not expose the disk to direct sunlight, extremely high or low

temperatures, or excessive humidity, dust or liquids.

• Do not open the sliding shutter and touch the exposed surface

of the ﬂoppy disk inside.

• Do not expose the disk to magnetic ﬁelds, such as those pro-

duced by televisions, speakers, motors, etc., since magnetic

ﬁelds can partially or completely erase data on the disk, ren-

dering it unreadable.

• Never use a ﬂoppy disk with a deformed shutter or housing.

• Do not attach anything other than the provided labels to a

ﬂoppy disk. Also make sure that labels are attached in the

proper location.

●

To protect your data (write-protect tab):

• To prevent accidental erasure of important data, slide the disk’s

write-protect tab to the “protect” position (tab open).

●

Data backup

• For maximum data security Yamaha recommends that you

keep two copies of important data on separate ﬂoppy disks.

This gives you a backup if one disk is lost or damaged.

• When the PSR-9000 is turned on, the LED below the ﬂoppy disk

slot will be lit indicating that the Disk Drive is ready to use.

This lamp is always on

when the power is on,

regardless of the disk oper-

ation.

DISK IN USE

This lamp lights during disk read/write

operations, such as when a disk has

been inserted, during recording, play-

back, formatting, etc.

Write protect tab ON

(locked or write pro-

tected)

Write protect tab OFF

(unlocked or write

enabled)

Handling and Installation of Options

WARNING

• Before beginning installation, switch off the power to the PSR-9000 and con-

nected peripherals, and unplug them from the power outlet. Then remove all

cables connecting the PSR-9000 to other devices. (Leaving the power cord

connected while working can result in electric shock. Leaving other cables

connected can interfere with work.)

• Do not disassemble, modify, or apply excessive force to board areas and

connectors on hard disk, and SIMMs. Bending or tampering with boards and

connectors may lead to electric shock, ﬁre, or equipment failures.

CAUTION

• Before handling the internal hard disk or SIMMs, you should brieﬂy touch

the metal surface to which the hard-disk or SIMM cover is attached (or other

such metallic area — be careful of any sharp edges) with your bare hand so

as to drain off any static charge from your body. Note that even a slight

amount of electrostatic discharge may cause damage to these components.

• It is recommended that you wear gloves to protect your hands from metallic

projections on the PSR-9000 hard disk, SIMMs, and other components.

Touching leads or connectors with bare hands may cause ﬁnger cuts, and

may also result in poor electrical contact or electrostatic damage.

• Take care to avoid dropping screws into the PSR-9000 unit. If a screw does

fall in, be sure to remove it before replacing the cover and powering up the

unit. Starting the unit with a loose screw inside may lead to improper opera-

tion or equipment failure. (If you are unable to retrieve a dropped screw, con-

sult your Yamaha dealer for advice.)

Yamaha PSR-9000 versie 2 Portatone Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PSR-9000 versie 2 Portatone

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info