Bedienungsanleitung Yamaha PSR-A1000 (Seite 144 von 156) (Englisch)

635394

144

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

PSR-A1000

144

Troubleshooting

Problem Possible Cause and Solution

• The PSR-A1000 does not turn on; there is no

power.

Make sure that the PSR-A1000 has been plugged in properly (page 16).

• A click or pop is heard when the power is

turned on or off.

This is normal when electrical current is applied to the instrument.

• Noise is heard from the PSR-A1000’s

speakers.

Using a mobile phone in close proximity to the PSR-A1000 may produce

interference. To prevent this, turn off the mobile phone, or use it further away from

the PSR-A1000.

• The display is too bright or too dark to read. The brightness of the display may be affected by the surrounding temperature;

try adjusting the contrast (page 17).

• The keyboard volume is low compared to that

of the Auto Accompaniment or song playback.

The overall keyboard volume or the independent volume level of the keyboard

part may be set too low. Raise the MAIN/LAYER/LEFT volume voices or lower

the STYLE/SONG volume in the BALANCE display (page 58).

• The volume of the Auto Accompaniment or

song playback is low compared to that of the

keyboard.

The volume level of one or more accompaniment parts or song channels is set

too low. Raise the part or channel level(s) in the appropriate MIXER display

(page 113).

• The overall volume is low, or no sound is

heard.

• The Master Volume is set too low; set it to an appropriate level with the

[MASTER VOLUME] dial.

• The volume of the individual parts may be set too low. Raise the volume of

MAIN, LAYER, LEFT, STYLE, and SONG in the BALANCE display (page 58).

• Make sure the desired channel is set to ON (page 58, 69).

• Headphones are connected, disabling the speaker output. Unplug the

headphones.

• Make sure the Local Control function is set to ON (page 129).

• Not all simultaneously-played notes sound. You may be exceeding the maximum polyphony of the PSR-A1000. When this

happens, the earliest played notes will stop sounding, letting the latest played

notes sound. See page 146 for information on the maximum polyphony.

• Accompaniment style or Song playback does

not start.

• MIDI Clock may be set to “EXTERNAL.” Make sure this is set to “INTERNAL”

(page 130).

• Make sure to press the appropriate [START/STOP] button. To play an

accompaniment style, press the STYLE [START/STOP] button (page 58); to

playback a song, press the SONG [START/STOP] button (page 67).

•“New Song” (a blank song) has been selected. Make sure to select an

appropriate song in the SONG display (page 67).

• The song has been stopped at the end of the song data. Return to the

beginning of the song by pressing the [TOP] button (page 69).

• The Multi Pads do not play back, even when

one of the MULTI PAD buttons is pressed.

MIDI Clock may be set to “EXTERNAL.” Make sure this is set to “INTERNAL”

(page 130).

• Only the rhythm channel plays. Make sure the Auto Accompaniment function is turned on; press the [ACMP]

button.

• The accompaniment style does not start,

even when Synchro Start is in standby

condition and a key is pressed.

You may be trying to start accompaniment by playing a key in the right hand

range of the keyboard. Make sure to play a key in the left-hand (accompaniment)

range of the keyboard.

• The desired chord is not recognized or output

by the auto accompaniment.

• You may not be playing the correct keys to indicate the chord. Refer to “Chord

Types Recognized in the Fingered Mode” (page 60).

• You may be playing the keys according to a different ﬁngering mode, and not

the one currently selected. Check the accompaniment mode, and play the

keys according to the selected mode (page 59).

• An unexpected result or malfunction occurred

during an operation.

If, during execution of an operation, you simultaneously press three or more

buttons that are unrelated to the operation or normal procedure, unexpected or

unusual results may occur.

• Auto accompaniment chords are recognized

regardless of the split point or where chords

are played on the keyboard.

This is normal if the ﬁngering mode is set to “Full Keyboard” or “AI Full Keyboard.”

If either of these is selected, chords are recognized over the entire range of the

keyboard, irrespective of the split point setting. If desired, select a different

ﬁngering mode (page 59).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-A1000 Seite 144

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PSR-A1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info