Bedienungsanleitung Yamaha PSR-E203 (Seite 9 von 68) (Englisch)

635609

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Setting Up

PSR-E203/YPT-200 Owner’s Manual 9

Make all necessary connections BEFORE turning the power on.

The PSR-E203/YPT-200 speakers are automatically

shut off when a plug is inserted into this jack. The

PHONES/OUTPUT jack also functions as an external

output.

You can connect the PHONES/OUTPUT jack to a

keyboard ampliﬁer, stereo system, mixer, tape

recorder, or other line-level audio device to send the

instrument’s output signal to that device.

The sustain function lets you produce a natural sustain

as you play by pressing an optional footswitch. Plug

the Yamaha FC4 or FC5 footswitch into this jack and

use it to switch sustain on and off.

The instrument also features MIDI terminals, allow-

ing you to interface the instrument with other MIDI

instruments or computers. (For more information, see

page 50.)

Press the [STANDBY/ON] switch to turn on the

power. Pressing the switch again turns the power off.

When you ﬁrst turn on the power, make sure to turn

down the volume of the instrument by pressing the

MASTER VOLUME [-] button several times. While

playing the keyboard, adjust the volume level by using

the MASTER VOLUME [+] and [-] buttons.

All panel settings as well as the settings made via the

display are reset to their default values whenever the

power is turned off.

Connecting headphones (PHONES/OUTPUT Jack)

Connecting a footswitch (SUSTAIN Jack)

•Avoid listening with the headphones at high volume for

long periods of time; doing so may not only result in ear

fatigue, it may be damaging to your hearing.

WARNING

•To prevent damage to the speakers, set the volume of the

external devices at the minimum setting and turn power

off the devices before connecting them. Failure to

observe these precautions may result in electric shock or

equipment damage. Also, be sure to set the volumes of

external devices at their minimum levels and gradually

raise the volume controls while playing the instrument to

set the desired listening level.

CAUTION

• Make sure that the footswitch plug is properly connected to

the SUSTAIN jack before turning on the power.

• Do not press the footswitch while turning the power on. Doing

this changes the recognized polarity of the footswitch, result-

ing in reversed footswitch operation.

NOTE

Using the MIDI Terminals

Turn on the power

other MIDI instrument

• MIDI cables (sold separately) must be used for connecting to

MIDI devices. They can be bought at music stores, etc.

NOTE

• When using a power adaptor, even when the power is off,

a small amount of electricity is still being consumed by

the instrument. When you are not using the instrument for

a long time, make sure to unplug the AC power adaptor

from the wall AC outlet, and/or remove the batteries from

the instrument.

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-E203 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PSR-E203

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info