Bedienungsanleitung Yamaha PSR-E423 (Seite 10 von 92) (Englisch)

464229

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Owner’s Manual

Setting Up

Be sure to do the following operations BEFORE turning on the power.

Power Requirements

Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an

AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not

deplete resources.

Using an AC Power Adaptor

1 Make sure that the [ ](Standby/On) switch of the

instrument is in the “Standby” position.

2 Connect the AC adaptor to the power supply jack.

3 Plug the AC adaptor into an AC outlet.

Using Batteries

1 Open the battery compartment cover located on the

instrument’s bottom panel.

2 Insert the six new batteries, being careful to follow

the polarity markings on the inside of the compart-

ment.

3 Replace the compartment cover, making sure that it

locks firmly in place.

For battery operation the instrument requires six 1.5V

“AA” size, LR6 or equivalent batteries. (Alkaline bat-

teries are recommended.) When battery power becomes

too low for proper operation, make sure to replace all

batteries, following the precautions listed below.

If necessary, also make sure to save all important User

data (see pages 50, 77).

• Use the specified adaptor (page 86). The use of other

adaptors may result in irreparable damage to both the

adaptor and the instrument.

• Unplug the AC Power Adaptor when not using the

instrument, or during electrical storms.

• Connecting the AC power adaptor automatically supplies

power from the adaptor and overrides battery power, even

when batteries are installed.

WARNING

CAUTION

AC outlet

AC power

adaptor

NOTE

• Be sure to install the batteries in the same direction, main-

taining the correct polarity (as shown). Incorrect battery

installation may result in heat, fire and/or leaking of corro-

sive chemicals.

• When the batteries run down, replace them with a com-

plete set of six new batteries. NEVER mix old and new bat-

teries. Do not use different kinds of batteries (e.g. alkaline

and manganese) at the same time.

• If the instrument will not be used for an extended period of

time, remove the batteries to prevent possible fluid leakage.

• Use only manganese or alkaline batteries for this instru-

ment. Other types of batteries (including rechargeable bat-

teries) may exhibit a sudden drop in power when the

batteries are low, possibly resulting in a loss of flash mem-

ory data.

• Please use the power adaptor when transferring data to

flash memory. Batteries (including rechargeable types) can

be drained rapidly by this type of operation. If the batteries

do become drained during a data transfer, both the data

being transferred and the data currently in the transfer des-

tination will be lost.

CAUTION

NOTICE

Setting Up

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-E423 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PSR-E423

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info