Bedienungsanleitung Yamaha PSR-K1 (Seite 76 von 100) (Englisch)

635573

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Accessory CD-ROM Installation Guide

PSR-K1 Owner’s Manual

SOFTWARE LICENSING

AGREEMENT

The following is a legal agreement between you, the end user,

and Yamaha Corporation (“Yamaha”). The enclosed Yamaha soft

ware program is licensed by Yamaha to the original purchaser for

use only on the terms set forth herein. Please read this licensing

agreement with care. Opening this package indicates that you

accept all terms outlined herein. If you do not agree to the terms,

return this package unopened to Yamaha for a full refund.

1. GRANT OF LICENSE AND COPYRIGHT

Yamaha grants you, the original purchaser, the right to use one copy

of the enclosed software program and data (“SOFTWARE”) on a sin

gle-user computer system. You may not use it on more than one com-

puter or computer terminal. The SOFTWARE is owned by Yamaha

and is protected by Japanese copyright laws and all applicable inter

national treaty provisions. You are entitled to claim ownership of the

media in which the SOFTWARE is included. Therefore, you must

treat the SOFTWARE like any other copyrighted materials.

2. RESTRICTIONS

The SOFTWARE program is copyrighted. You may not engage in

reverse engineering or reproduction of the SOFTWARE by other

conceivable methods. You may not reproduce, modify, change, rent,

lease, resell, or distribute the SOFTWARE in whole or in part, or cre

ate derivative works from the SOFTWARE. You may not transmit or

network the SOFTWARE with other computers. You may transfer

ownership of the SOFTWARE and the accompanying written materi

als on a permanent basis provided that you retain no copies and the

recipient agrees to the terms of the licensing agreement.

3. TERMINATION

The licensing condition of the software program becomes effective

on the day that you receive the SOFTWARE. If any one of the copy

right laws or clauses of the licensing conditions is violated, the

licensing agreement shall be terminated automatically without notice

from Yamaha. In this case, you must destroy the licensed SOFT

WARE and its copies immediately.

4. PRODUCT WARRANTY

Yamaha warrants to the original purchaser that if the SOFTWARE,

when used in normal conditions, will not perform the functions

described in the manual provided by Yamaha, the sole remedy will be

that Yamaha will replace any media which proves defective in materi

als or workmanship on an exchange basis without charge. Except as

expressly set forth above, the SOFTWARE is provided “as is,” and no

other warranties, either expressed or implied, are made with respect

to this software, including, without limitation the implied warranties

of merchantability and ﬁtness for a particular purpose.

5. LIMITED LIABILITY

Your sole remedies and Yamaha’s entire liability are as set forth

above. In no event will Yamaha be liable to you or any other person

for any damages, including without limitation any incidental or con

sequential damages, expenses, lost proﬁts, lost savings or other dam-

ages arising out of the use or inability to use such SOFTWARE even

if Yamaha or an authorized dealer has been advised of the possibility

of such damages, or for any claim by any other party.

6. GENERAL

This license agreement shall be interpreted according to and gov-

erned by Japanese laws.

Depending on the Macintosh and operating system version

that you are using, the included studio setup ﬁle for the

MIDI instrument still may not work even after you have

performed the above steps. (MIDI transmission and recep-

tion will not be possible even if the setup is valid.)

In this case, use the following procedure to re-create the

setup ﬁle.

 Connect the MIDI instrument and Macintosh via USB

cable, and turn on the power of the MIDI instrument.

 Start up OMS Setup, and from the “File” menu, choose

“New setup.”

 The OMS driver search dialog box will appear.

Uncheck both [Modem] and [Printer] if you are using a

USB connection.

 Click the [Find] button to search for the device.

When a device has been found, the OMS Driver Setting

dialog box will display “USB-MIDI.”

• If the device was found correctly, click the [OK]

button to proceed.

• If the device was not found, re-check that the cable

connections are correct, and repeat the procedure

from step .

 Make sure that the port is shown below the device that

was found. (This will be a name such as USB-MIDI.)

Check the check box for the port, and then click the

[OK] button.

 A dialog box will appear, allowing you to name the ﬁle

that will be saved. Input the desired ﬁlename, and click

[Save].

This completes the OMS setup.

 From the “Studio” menu, choose “Test,” and click the

port icon.

If a channel sounds on the MIDI instrument, the system

is operating correctly.

For details on using OMS, refer to “OMS_***_Mac.pdf,”

included with OMS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-K1 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PSR-K1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info