Bedienungsanleitung Yamaha PSR-K1 (Seite 81 von 100) (Englisch)

635573

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Troubleshooting

PSR-K1 Owner’s Manual

■ For the included software

The driver cannot be installed.

• Is the USB cable connected correctly?

→ Check the USB cable connection.

→ Disconnect the USB cable, then connect it again.

Windows

• Is the USB function enabled on your computer?

→ When you connect the MIDI instrument to the computer for

the ﬁrst time, if the “Add New Hardware Wizard” does not

appear, the USB function on the computer may be disabled

(see page

73). Perform the following steps.

Select [Control Panel] → [System] → [Device Manager]

(for Windows 98/Me), or select [Control Panel] (Windows

XP: Classic View) → [System] → [Hardware] → [Device

Manager] (for Windows 2000/XP).

In the Device Manager, make sure that the marks “!” and

“x” are NOT shown for the “Universal Serial Bus control-

lers” or “USB Root Hub” (nested within “Universal Serial

Bus controllers”). (Make sure that “Device by type” is

selected in the View menu for Windows XP/2000. In Win-

dows 98/Me, click the “View devices by type” radio button

at the top.) If you see an “!” or “x” mark, the USB controller

is disabled. For more information, refer to the owner’s

manual of your computer.

Windows

• Is any unknown device registered?

→ If driver installation fails, the MIDI instrument will be marked

as an “Unknown device,” and you will not be able to install the

driver. Delete the “Unknown device” by following the steps

below.

Select [Control Panel] → [System] → [Device Manager]

(for Windows 98/Me), or select [Control Panel] (Windows

XP: Classic View) → [System] → [Hardware] → [Device

Manager] (for Windows 2000/XP).

Check for an “Other device” in the Device Manager. (Make

sure that “Device by type” is selected in the View menu for

Windows XP/2000. In Windows 98/Me, click the “View

devices by type” radio button at the top.)

If you ﬁnd “Other devices,” double-click it to extend the tree

to look for “Unknown device.” If one appears, select it and

click the [Remove] button.

Remove the USB cable from the MIDI instrument, and

make the connection again.

Install the driver again. See page 73.

When controlling the MIDI instrument from your

computer via USB, the MIDI instrument does not

operate correctly or no sound is heard.

• Did you install the driver?

→ Windows users See page 72.

→ Macintosh users See page 74.

• Is the USB cable connected correctly?

• Are the volume settings of the tone generator, playback device,

and application program set to the appropriate levels?

•Have you selected an appropriate port in the sequence software?

• Are you using the latest USB MIDI driver?

→

The latest driver can be downloaded from the following web site.

http://www.yamahasynth.com/

Playback response is delayed.

• Does your computer satisfy the system requirements?

• Is any other application or device driver running?

Macintosh

→ Turn off virtual memory.

→ Disable AppleTalk.

Cannot suspend or resume the computer correctly.

• Do not suspend the computer while the MIDI application is run-

ning.

• If you are using Windows 2000, you may not be able to suspend/

resume normally, depending on the particular environment (USB

Host Controller, etc.). Even so, simply disconnecting and con-

necting the USB cable will allow you to use the MIDI instrument

functions again.

How can I delete or re-install the driver?

Windows Me/98

When the MIDI instrument is recognized correctly, double-

click “System” in the Control Panel to open the System

window.

Double-click the “Device Manager” tab, select “YAMAHA

USB MIDI Driver” and delete it.

Use the MS-DOS prompt or Explorer to delete the follow-

ing three ﬁles.

• \WINDOWS\INF\OTHER\YAMAHAMIDI instrument.INF

• \WINDOWS\SYSTEM\Xgusb.drv

• \WINDOWS\SYSTEM\Ymidusb.sys

Disconnect the USB cable.

Restart the computer.

Re-install the driver (see page 72).

Macintosh

Delete the ﬁles in the following locations:

• [System Folder] → [Control Panels] →

[YAMAHA USB MIDI Patch]

• [System Folder] → [Extensions] →

[USB YAMAHA MIDI Driver]

• [System Folder] → [OMS Folder] →

[YAMAHA USB MIDI OMS Driver]

Restart the computer.

Install the driver (see page 74) and set up OMS (see page

75).

• To delete the above ﬁles using Explorer, select “Folder

Options” from the Tool (View) menu, and select “Show all ﬁles

(and folders).”

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha PSR-K1 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha PSR-K1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info