Bedienungsanleitung Yamaha RKX1 (Seite 2 von 2) (Englisch)

557284

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

BATTERY INSTALLATION

Press the top portion of the battery compartment lid, at the

same time, slide the lid in the direction of the arrow.

2 Install the batteries (size "AA", R6, UM-3) with correct

polarity. Follow the diagram in the compartment.

3 Slide the lid in the direction of the arrow until it clicks.

BATTERY REPLACEMENT

When the operating distance of the remote control noticeably

decreases, the batteries are exhausted. Immediately replace the

batteries with new ones.

÷ Do not use an old battery together with a new one.

÷ Install the same type of batteries at the same time. Do not use

different kinds of batteries (carbon, alkaline, Ni-Cd, etc.) at the

same time even though they are the same shape.

÷ There are two kinds of batteries in the market: rechargeable

and non-rechargeable. Read the caution labels on the battery

carefully.

BATTERY SAFETY

Incorrect use of the battery can cause leakage or explosion.

Proper handing and use of batteries are as follows:

÷ When the remote control will not be used for an extended

period of time, remove the batteries.

÷ Never disassemble, heat or throw a battery into a fire.

÷ Do not connect (short circuit) the (+) and (–) poles of a battery

with a piece of wire, metal, etc. In case of leakage, thoroughly

wipe off all the electrolyte from the battery compartment and

install new batteries.

REMOTE CONTROL OPERATION RANGE

The remote control transmitter uses infrared light to control the unit.

Therefore, to function properly, there must be a clear,

unobstructed path between the transmitter and the sensor on the

deck. The normal operating range is about 7 meters (23 feet) and

within 30 degrees perpendicular to the front panel.

Note

Be careful not to expose the infrared signal receptor to direct

sunlight or strong light. If strong light is applied, the remote control

transmitter may not function or may be difficult to operate.

SINGLE DECK

INTRO SCAN

DOUBLE DECK

DUBBING

DECK A/B DIR A DIR B

COUNTER

RESET

PLAY

REC/PAUSE REC MUTE

STOP

RKX1

¤‹

⁄

Thank you for purchasing the Yamaha RKX1 Remote Control System.

With the RKX1, YAMAHA cassette decks designed for remote control compatiblity can be operated.

Function of Controls

The keys which have the same names and marks are identical to

the functions with the buttons on the cassette deck. However, refer

to the following description for the exceptional use.

~ INTRO SCAN (™/£) keys (For Single Cassette Deck

only)

These keys have the same function as the buttons on the

deck.

Ÿ DUBBING keys (For Double Cassette Deck only)

Press these keys at the same time to dub the tape at normal

speed. These keys are not used for high speed dubbing.

! DECK A/B selector, DIR A/DIR B keys (For Double

Cassette Deck only)

Each time the DECK A/B selector key is pressed, the

operation changes between DECK A and B alternately.

Each time the DIR (Direction) A key is pressed, the tape

running direction of DECK A changes. Each time the DIR B

key is pressed, the tape running direction of DECK B

changes.

* DIR A button can also be used as DIRECTION button for

single reverse deck.

⁄ COUNTER RESET key

This key has the same function as the button on the deck.

This key functions only for electronic tape counters.

@ Main operation keys

1 key: Pressing this key will rewind the tape.

PLAY key: Is identical to the PLAY button on the deck.

¡ key: Pressing this key will advance the tape.

REC/PAUSE and STOP keys: Are identical to the REC/

PAUSE and STOP button on the deck.

REC MUTE key: Operates the recording MUTE function of

the MUTE/SEARCH button on the deck.

Note

With some tape decks, the 1 key and ¡ key function in the

same manner as the SEARCH (1/¡) key in the play mode.

¤ SEARCH (1/¡) keys

These keys are available for decks with selection search

function. For search operation with the remote control

transmitter, use the SEARCH keys on the remote control

transmitter. By pressing ¡ key, the tape will advance to

the beginning of the next selection and begin play.

By pressing 1 key, the tape will rewind to the beginning of

the current selection and begin play.

Note

With the auto reverse tape deck, the SEARCH (1/¡) keys

function in the opposite way according to the tape running direction.

30˚30˚

Remote sensor

7 m (23 feet)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RKX1 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info