492656
30
Zoom out
Zoom in
Vorherige Seite
1/151
Nächste Seite
En 30
Necessary settings
To use HDMI Control and ARC, you need to configure the following settings.
For details on settings and operations of your TV, refer to the instruction manual of the TV.
1
After connecting external devices (TV, playback devices, etc.) and
power cable of this unit, turn on this unit, TV and playback devices.
2
Configure the settings of this unit.
a Check that ARC is enabled on the TV.
b Switch the TV input to display the video from this unit.
c Press ON SCREEN.
d Use the cursor keys to select “Setup” and press ENTER.
e Use the cursor keys ( / ) to select “HDMI”.
f Use the cursor keys ( / ) to select “HDMI Control” and press ENTER.
g Use the cursor keys to select “On.
h Press ON SCREEN.
3
Configure the settings for HDMI Control.
a Enable HDMI Control on the TV and playback devices (HDMI Control-compatible BD/
DVD player, etc).
b Turn off the main power of the TV and then turn off this unit and playback devices.
c Turn on this unit and playback devices and then turn on the main power of the TV.
d Switch the TV input to display the video from this unit.
e Check the followings.
On this unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV: The video from the playback device is displayed.
f Check that this unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
Now the necessary settings are complete.
If you select a TV program with the TV remote control, the input source of this unit will
be automatically switched to “AUDIO1” and the TV audio will be played back on this
unit.
If TV audio cannot be heard, check that “ARC” (p.111) in the “Setup” menu is set to
“On”.
If HDMI Control does not work properly, try turning off and on (or unplugging and re-plugging) the
devices. It may solve the problem.
If any audio interruption happens while using ARC, set “ARC” (p.111) in the “Setup” menu to “Off
and use an audio cable (digital optical or stereo pin cable) to input TV audio to this unit (p.31).
“AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the
AUDIO1 jacks, use “TV Audio Input” (p.111) in the “Setup” menu to change the TV audio input
assignment. To use the SCENE function (p.53), you also need to change the input assignment for
SCENE(TV).
RETURN DISPLAY
ENTER
ON SCREEN
OPTION
ON SCREEN
Cursor keys
ENTER
1 2
TV connection
3 4 5 6 7 8 9
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha RX-A2010 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha RX-A2010

Yamaha RX-A2010 Kurzanleitung - Englisch - 8 seiten

Yamaha RX-A2010 Bedienungsanleitung - Holländisch - 151 seiten

Yamaha RX-A2010 Kurzanleitung - Holländisch - 8 seiten

Yamaha RX-A2010 Bedienungsanleitung - Dänisch - 151 seiten

Yamaha RX-A2010 Bedienungsanleitung - Französisch - 151 seiten

Yamaha RX-A2010 Bedienungsanleitung - Spanisch - 151 seiten

Yamaha RX-A2010 Bedienungsanleitung - Schwedisch - 151 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info