Bedienungsanleitung Yamaha RX-A2010 (Seite 106 von 151) (Englisch)

492656

106

Zoom out

Zoom in

Vorherige Seite

1/151

Nächste Seite

En 106

❑ Subwoofer 1, Subwoofer 2

Selects whether or not subwoofer is connected to the SUBWOOFER 1 or

SUBWOOFER 2 jack and its phase.

Settings

• When the bass sound is lacking or unclear, switch the subwoofer phase.

❑ SWFR Layout

Selects a subwoofer layout when 2 subwoofers are used.

Settings

• This setting is not available when “Subwoofer 1” or “Subwoofer 2” is set to “None”.

❑ Extra Bass

Sets the speakers to produce the front channel low-frequency components.

Settings

• This setting is not available when both “Subwoofer 1” and “Subwoofer 2” are set to “None”, or “Front” is set

to “Small”.

■ Distance

Sets the distance between each speaker and listening position so that sounds from the

speakers reach the listening position at the same time. First, select the unit of distance

from “Meter” or “Feet”.

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front

Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2

Setting range

0.30m ~ 24.00m (1.0ft ~ 80.0ft) *0.05m (0.2ft) steps

Default

3.00m (10.0ft)

■ Level

Adjusts the volume of each speaker.

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front

Presence L, Front Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2

Setting range

-10.0dB ~ +10.0dB (0.5dB steps)

Default

0.0dB

Adjusting while viewing the front display

a Press LEVEL.

b Use the cursor keys ( / ) to select a speaker.

c Use the cursor keys ( / ) to adjust the volume of the selected speaker.

Use

Normal

(default)

Select this when a subwoofer is connected to the SUBWOOFER 1 or

SUBWOOFER 2 jack (not to reverse the phase). The subwoofer will

produce LFE (low-frequency effect) channel audio and low-frequency

components from other channels.

Reverse

Select this when a subwoofer is connected to the SUBWOOFER 1 or

SUBWOOFER 2 jack (reverse the phase). The subwoofer will produce

LFE (low-frequency effect) channel audio and low-frequency

components from other channels.

None

Select this when no subwoofer is connected to the SUBWOOFER 1 or

SUBWOOFER 2 jack. The front speakers will produce LFE (low-

frequency effect) channel audio and low-frequency components from

other channels when both “Subwoofer 1” and “Subwoofer 2” are set

to “None”.

Left + Right

Select this when 2 subwoofers are placed on the left and right sides of

the room.

Front + Rear

Select this when 2 subwoofers are placed on the front and rear sides of

the room.

Monaural x2

(default)

Select this when 2 subwoofers are placed freely.

Off (default)

Depending on the size of the front speakers, either the subwoofer or

front speakers produce the front channel low-frequency components.

Both the front speakers and subwoofer produce the front channel low-

frequency components.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-A2010 Seite 106

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-A2010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info