Bedienungsanleitung Yamaha RX-A2080 (Seite 131 von 192) (Englisch)

707150

131

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

En 131

Speaker

Configures the speaker settings manually.

Default settings are underlined.

■ Setting Pattern

Registers two speaker setting patterns and switches between them.

When you configure the following speaker settings, the settings will be memorized in the

selected pattern.

• Measurement results (YPAO)

• Power Amp Assign

• Configuration

• Distance

• Level

•Parametric EQ

Settings

Pattern1

, Pattern2

• The setting pattern currently selected is shown at the center of the diagram on the right side of the screen.

• This function is useful when you want to save certain settings according to the varying conditions of your

listening environment. For example, if you want to switch the settings when curtains are open or closed, you

can save the settings suited for each condition and switch between them.

■ Setting Data Copy

Copies the “Setting Pattern” parameters in the specified direction.

Choices

■ Power Amp Assign

Selects a speaker system.

The unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2 subwoofers

(with built-in amplifier) to create the favorite acoustic space in your room. You can also apply

bi-amp connections, channel expansion (using an external power amplifier) or multi-zone

configurations to enhance your system.

Settings

Pattern1 ▶ 2 Copies the “Pattern1” parameters to “Pattern2”.

Pattern2 ▶ 1 Copies the “Pattern2” parameters to “Pattern1”.

Basic

Select this option when you use the basic speaker configuration (up to 9-channel

plus rear presence speakers) (p.21).

7.2 +1Zone

Select this option when you use Zone2 (or Zone3) speakers in addition to the 7.2

system in the main zone (p.32).

You can select a zone to be assigned to the EXTRA SP 1 jacks (default: Zone2).

7.2.2 +1Zone

Select this option when you use Zone2 (or Zone3) speakers in addition to the 7.2.2

system in the main zone (p.32).

You can select a zone to be assigned to the EXTRA SP 2 jacks (default: Zone2).

7.2 +2Zone

Select this option when you use Zone2 and Zone3 speakers in addition to the 7.2

system in the main zone (p.32).

You can select a zone to be assigned to the EXTRA SP 1 and EXTRA SP 2 jacks

(default: Zone2 for EXTRA SP 1, Zone3 for EXTRA SP 2).

7.2.4 [ext.RP]

(RX-A3080 only)

Select this option when you use the 7.2.4 system including rear presence channel

expansion using an external amplifier (p.33).

7.2.4 [ext.Front]

(RX-A3080 only)

Select this option when you use the 7.2.4 system including front channel

expansion using an external amplifier (p.34).

7.2.4 [ext.FP+RP]

(RX-A3080 only)

Select this option when you use the 7.2.4 system including front presence and

rear presence channel expansion using an external amplifier (p.34).

7.2.2 [ext.Front]

+1Zone

Select this option when you use Zone2 (or Zone3) speakers in addition to the 7.2.2

system (including front channel expansion using an external amplifier) in the

main zone (p.35).

You can select a zone to be assigned to the EXTRA SP 2 jacks (default: Zone2).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-A2080 Seite 131

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-A2080

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info