Bedienungsanleitung Yamaha RX-A2080 (Seite 134 von 192) (Englisch)

707150

134

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

En 134

Subwoofer

Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack

and its phase.

Settings

When the bass sound is lacking or unclear, switch the subwoofer phase.

Layout settings

This setting is not available when “Subwoofer 1” or “Subwoofer 2” is set to “None”.

■ Distance

Sets the distance between each speaker and listening position so that sounds from the

speakers reach the listening position at the same time. First, select the unit of distance from

“Meter” or “Feet”.

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front

Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2

Setting range

0.30 m to 3.00

m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments

■ Level

Adjusts the volume of each speaker.

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front

Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2

Setting range

-10.0 dB to 0.0

dB to +10.0 dB (0.5 dB increments)

■ Parametric EQ

Adjusts the tone with an equalizer.

Settings

“YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “YPAO”

have already been saved (p.55). Press ENTER again to view the measurement results.

Use

Normal

Select this option when a subwoofer is connected to the SUBWOOFER 1 or

SUBWOOFER 2 jack (phase not reversed). The subwoofer will produce LFE

(low-frequency effect) channel audio and low-frequency components from other

channels.

Reverse

Select this option when a subwoofer is connected to the SUBWOOFER 1 or

SUBWOOFER 2 jack (phase reversed). The subwoofer will produce LFE

(low-frequency effect) channel audio and low-frequency components from other

channels.

None

Select this option when no subwoofer is connected to the SUBWOOFER 1 or

SUBWOOFER 2 jack. The front speakers will produce LFE (low-frequency effect)

channel audio and low-frequency components from other channels when both

“Subwoofer 1” and “Subwoofer 2” are set to “None”.

Left + Right

Select this option when 2 subwoofers are placed on the left and right sides of the

room.

Front + Rear

Select this option when 2 subwoofers are placed on the front and rear sides of the

room.

Monaural x2

Select this option when 2 subwoofers are placed freely.

Manual

Select this option when you want to adjust the equalizer manually.

For details, see “Manual equalizer adjustment”.

YPAO:Flat Adjusts individual speakers to achieve the same characteristics.

YPAO:Front

Adjusts individual speakers to achieve the same characteristics as the front

speakers.

YPAO:Natural Adjusts all speakers to achieve a natural sound.

Through

Does not use the equalizer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-A2080 Seite 134

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-A2080

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info