Bedienungsanleitung Yamaha RX-A3050 (Seite 19 von 193) (Englisch)

652523

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

En 19

The unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2 subwoofers to create the favorite acoustic space in your room.

You can also apply bi-amp connections, channel expansion (using an external power amplifier) or multi-zone configurations to enhance your system (p.28).

Functions of each speaker

• Use “Ideal speaker layout” (diagram on the right) as reference. You do not need to exactly adjust the

speaker layout to this diagram since the YPAO function of the unit will automatically optimize the speaker

settings (such as distances) to suit the speaker layout.

• When using only one surround back speaker, place it straight behind the listening position (middle of “SBL”

and “SBR” in the diagram).

• The unit creates front Virtual Presence Speaker (VPS) using the front, center, and surround speakers to

produce 3-dimensional sound fields even when no front presence speakers are connected. However, we

recommend using front presence speakers in order to experience the full effect of the sound fields (and

rear presence speakers for further spatial sounds).

• (RX-A3050 only)

The unit creates rear Virtual Presence Speaker (VPS) using the front, center, and surround speakers to

produce natural 3-dimensional sound fields when front presence speakers are connected but no rear

presence speakers.

Ideal speaker layout

1 Connecting speakers

Caution

• Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6  MIN”. In this case, you can also use 4-ohm speakers as the front speakers.

For details, see “Setting the speaker impedance” (p.26).

Speaker type Abbr. Function

Front (L) 1

Produce front left/right channel sounds (stereo sounds).

Front (R) 2

Center 3

Produces center channel sounds (such as movie dialogues and

vocals).

Surround (L) 4 Produce surround left/right channel sounds. Surround speakers

also produce surround back channel sounds when no surround

back speakers are connected.

Surround (R) 5

Surround back (L) 6

Produce surround back left/right channel sounds.

Surround back (R) 7

Front presence (L) E

Produce CINEMA DSP effect sounds. In combination with CINEMA

DSP HD

(RX-A3050) or CINEMA DSP 3D (RX-A2050) (p.76), the

presence speakers create a natural 3-dimensional sound field in

your room.

Front presence (R) R

Rear presence (L) T

Rear presence (R) Y

Subwoofer 9

Produces LFE (low-frequency effect) channel sounds and

reinforces bass parts of other channels.

This channel is counted as “0.1”. You can connect 2 subwoofers to the

unit and place them on the left/right (or front/rear) sides of the room.

T Y

0.3 m (1 ft) or more

1.8 m

(5.9 ft)

0.5 to 1 m

(1.6 to 3.3 ft)

1.8 m

(5.9 ft)

0.5 to 1 m

(1.6 to 3.3 ft)

10°~30°10°~30°

1.8 m

(5.9 ft)

1.8 m

(5.9 ft)

1 2 3 4 5 6 7 8 9 10 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-A3050 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-A3050

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info