Bedienungsanleitung Yamaha RX-A820 (Seite 116 von 136) (Englisch)

516910

116

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

APPENDIX ➤ Troubleshooting En 116

Remote control

The files in the PC cannot be viewed or played

back.

The files are not supported by the unit or the media server.

Use the file format supported by both the unit and the media server. For

information about the file formats supported by the unit, see “Playing back music

stored on media servers (PCs/NAS)” (p.63).

The Internet radio cannot be played.

The selected Internet radio station is currently not available.

There may be a network problem at the radio station, or the service may have

been stopped. Try the station later or select another station.

The selected Internet radio station is currently broadcasting

silence.

Some Internet radio stations broadcast silence at certain of times of the day. Try

the station later or select another station.

Access to the network is restricted by the firewall settings of your

network devices (such as the router).

Check the firewall settings of your network devices. The Internet radio can be

played only when it passes through the port designated by each radio station.

The port number varies depending on the radio station.

Problem Cause Remedy

The unit cannot be controlled using the remote

control.

The unit is out of the operating range. Use the remote control within the operating range (p.5).

The batteries are weak. Replace with new batteries.

The unit’s remote control sensor is exposed to direct sunlight or

strong lighting.

Adjust the lighting angle, or reposition the unit.

The remote control is set to control external devices.

Press RECEIVER to set the remote control to control the unit (the key lights up in

orange).

The remote control IDs of the unit and the remote control are not

identical.

Change the remote control ID of the unit or the remote control (p.102).

External devices cannot be controlled using the

remote control.

The remote control is set to control the unit.

Press SOURCE to set the remote control to control external devices (the key lights

up in green).

The corresponding remote control code is not set properly.

Set the remote control code again (p.105). Even if the remote control code is

registered properly, some products may not respond to the remote control.

The remote control does not learn new functions.

(China, Korea, U.K. and Europe models only)

The batteries of the remote control of the unit and/or the external

device are weak.

Replace with new batteries.

The distance between the two remote controls is not appropriate. Place the remote controls at a proper distance (p.107).

The signal coding or modulation of the other remote control is not

compatible with the remote control.

Learning is impossible in this case.

Memory capacity is full.

Clear unnecessary assignments to free some memory space for new functions

(p.108).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-A820 Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-A820

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info