Bedienungsanleitung Yamaha RX-A860 (Seite 112 von 154) (Englisch)

652533

112

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

En 112

Front Presence

Selects a front presence layout when front presence speakers are used. This setting facilitates

the optimization of the sound field effect.

Settings

• This setting is not available when “Configuration (Front Presence)” is set to “None”.

•To play Dolby Atmos contents using the front presence speakers, see “Presence speaker layout” (p.22).

⬛ Distance

Sets the distance between each speaker and listening position so that sounds from the

speakers reach the listening position at the same time. First, select the unit of distance from

“Meter” or “Feet”.

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front

Presence R, Subwoofer

Setting range

0.30 m to 3.00 m

to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments

⬛ Level

Adjusts the volume of each speaker.

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front

Presence R, Subwoofer

Setting range

-10.0 dB to 0.0 dB

to +10.0 dB (0.5 dB increments)

⬛ Parametric EQ

Adjusts the tone with an equalizer.

Settings

“YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “Auto

Setup” have already been saved (p.44). Press ENTER again to view the measurement results.

⬛ Manual equalizer adjustment

Set “Parametric EQ” to “Manual” and press ENTER.

Press ENTER again to enter the edit screen.

Use the cursor keys to select a speaker and press ENTER.

• To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”.

• To copy the parametric equalizer values acquired with “Auto Setup” (p.44) to the “Manual” fields for fine

adjustment, select “PEQ Data Copy” and then an equalizer type.

Use the cursor keys (e/r) to select a center frequency from the 7 preset bands (4 for

subwoofer) and the cursor keys (q/w) to adjust the gain.

Setting range

Gain: -20.0 dB to +6.0 dB

Front Height

Select this option when front presence speakers are installed on the front side

wall.

Overhead Select this option when front presence speakers are installed to the ceiling.

Dolby Enabled SP

Select this option when using the Dolby Enabled speakers as the front presence

speakers.

Manual

Select this option when you want to adjust the equalizer manually.

For details, see “Manual equalizer adjustment”.

YPAO:Flat Adjusts individual speakers to achieve the same characteristics.

YPAO:Front

Adjusts individual speakers to achieve the same characteristics as the front

speakers.

YPAO:Natural Adjusts all speakers to achieve a natural sound.

Through

Does not use the equalizer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-A860 Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-A860

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info