Bedienungsanleitung Yamaha RX-V 685 (Seite 133 von 186) (Englisch)

699808

133

Zoom out

Zoom in

Vorherige Seite

1/186

Nächste Seite

Specifying the condition for the TRIGGER OUT jack to

function

Specifies the condition for the TRIGGER OUT jack to function.

Setup menu

“System” > “Trigger Output” > “Trigger Mode”

Settings

Power

The TRIGGER OUT jack functions in sync with the power status of the

zone specified with “

Target Zone.”

Source

The TRIGGER OUT jack functions in sync with the input switching in the

zone specified with “

Target Zone.”

An electronic signal is transmitted according to the setting made in

“Source.”

Manual

Select this to manually switch the output level for electronic signal

transmission with “Manual

.”

NOTE

For details on “Target Zone” in the “Setup” menu, see the following:

▪ “Specifying the zone with which the TRIGGER OUT jack functions are synchronized” (p.133)

Specifying the output level of the electronic signal

transmitted with each input

Specifies the output level of the electronic signal transmitted with each input, switching

when “

Trigger Mode” is set to “Source”.

Setup menu

“

System

” > “Trigger Output” > “Trigger Mode” > “

Source”

Choices

HDMI 1-5, AV 1-2, AUX, AUDIO 1-5, TUNER, PHONO, (network sources), Bluetooth,

USB, AirPlay, MusicCast Link, SERVER, NET RADIO

Settings

Low

Stops the electronic signal transmission when you switch to the input

source specified in this option.

High

Transmits the electronic signal when you switch to the input source

specified in this option.

Switching the output level for electronic signal

transmission manually

Switches the output level for electronic signal transmission manually when “Trigger

Mode” is set to “Manual”. This setting can also be used to confirm proper function of

the external device connected via the TRIGGER OUT jack.

Setup menu

“System” > “Trigger Output” > “Trigger Mode” > “Manual”

Settings

Low Stops the electronic signal transmission.

High Transmits the electronic signal.

Specifying the zone with which the TRIGGER OUT

jack functions are synchronized

Specifies the zone with which the TRIGGER OUT jack functions are synchronized.

Setup menu

“System” > “Trigger Output” > “Target Zone”

Settings

Main

When “Trigger Mode” is set to “Power,” electronic signal transmission is

synchronized with the power status of the main zone.

When “Trigger Mode” is set to “Source,” electronic signal transmission is

synchronized with the input switching in the main zone.

Zone2

When “Trigger Mode” is set to “Power,” electronic signal transmission is

synchronized with the power status of Zone2.

When “Trigger Mode” is set to “Source,” electronic signal transmission is

synchronized with the input switching in Zone2.

All

When “Trigger Mode” is set to “Power,” electronic signal transmission is

synchronized with the power status of the main zone or Zone2.

When “Trigger Mode” is set to “Source,” electronic signal transmission is

synchronized with the input switching in the main zone or Zone2.

NOTE

For details on “Trigger Mode” in the “Setup” menu, see the following:

▪ “Specifying the condition for the TRIGGER OUT jack to function” (p.133)

133

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha RX-V 685 Seite 133

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha RX-V 685

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info